Pytest HTML Reporter

Time taken 07:03:05 Hrs

895

TEST CASES

Suite Highlights

2^/3 Times

MOST FAILED SUITE

Suite	Pass	Fail	Error
testcase/AddNewNode/test_ADD_NEWNODE_ACT_1.py	1	0	0
testcase/AddNewNode/test_ADD_NEWNODE_ACT_2345.py	1	0	0
testcase/AddNewNode/test_ADD_NEWNODE_MISS_ATTB.py	1	0	0
testcase/AddNewNode/test_ADD_NEWNODE_MISS_REQID.py	1	0	0
testcase/AddNewNode/test_ADD_NEWNODE_REQID_1.py	0	1	0
testcase/AddNewNode/test_ADD_NEWNODE_REQID_2345.py	1	0	0
testcase/AddNewNode/test_ADD_NEWNODE_RESULT_1.py	0	0	0
testcase/AddNewNode/test_ADD_NEWNODE_RESULT_2.py	0	0	0
testcase/AddNewNode/test_ADD_NEWNODE_RESULT_3.py	0	0	0
testcase/AddNewNode/test_ADD_NEWNODE_RES_1.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_1.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_2.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_3.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_4.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_5.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_6.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_7.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_ACT_8.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_1.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_10.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_2.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_3.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_4.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_5.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_6.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_7.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_8.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_HOST_9.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_1.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_2.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_3.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_4.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_5.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_6.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_7.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_INDEX_8.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_PROVIDER_1.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_PROVIDER_2.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_REQID_1.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_REQID_2.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_REQID_3.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_REQID_4.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_REQID_5.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_REQID_6.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_1.py	0	1	0
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_2.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_3.py	1	0	0
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_4.py	0	1	0
testcase/DdnsCreate/test_DDNS_CREATE_RES_1.py	0	1	0
testcase/DdnsCreate/test_DDNS_CREATE_RES_2.py	0	1	0
testcase/DdnsCreate/test_DDNS_CREATE_RES_3.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_ACT_2.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_ACT_3.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_ACT_4.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_ACT_5.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_ACT_6.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_ACT_7.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_ACT_8.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_1.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_10.py	0	1	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_2.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_3.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_4.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_5.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_6.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_7.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_8.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_HOST_9.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_INDEX_1.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_INDEX_2.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_INDEX_3.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_INDEX_4.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_INDEX_5.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_INDEX_6.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_INDEX_7.py	0	1	0
testcase/DdnsEdit/test_DDNSEDIT_PROVIDER_1.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_PROVIDER_2.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_REQID_1.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_REQID_2.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_REQID_3.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_REQID_4.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_REQID_5.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_REQID_6.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_1.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_2.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_3.py	1	0	0
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_4.py	1	0	0
testcase/DdnsEdit/test_DDNS_EDIT_ACT_1.py	1	0	0
testcase/DdnsEdit/test_DDNS_EDIT_RES_1.py	1	0	0
testcase/DdnsEdit/test_DDNS_EDIT_RES_2.py	1	0	0
testcase/DdnsEdit/test_DDNS_EDIT_RES_3.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_1.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_2.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_3.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_4.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_5.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_6.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_7.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_ACT_8.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_1.py	0	1	0
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_2.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_3.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_4.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_5.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_6.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_7.py	0	1	0
testcase/DdnsRemove/test_DDNSREMOVE_REQID_1.py	0	1	0
testcase/DdnsRemove/test_DDNSREMOVE_REQID_2.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_REQID_3.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_REQID_4.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_REQID_5.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_REQID_6.py	1	0	0
testcase/DdnsRemove/test_DDNSREMOVE_RES_1.py	0	1	0
testcase/DdnsRemove/test_DDNSREMOVE_RES_2.py	0	1	0
testcase/DdnsRemove/test_DDNSREMOVE_RES_3.py	1	0	0
testcase/DdnsRemove/test_DDNS_REMOVE_RES_1.py	0	1	0
testcase/DdnsView/test_DDNSVIEW_ACT_1.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_ACT_2.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_ACT_3.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_ACT_4.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_ACT_5.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_ACT_6.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_ACT_7.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_ACT_8.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_PROVIDER_1.py	0	1	0
testcase/DdnsView/test_DDNSVIEW_REQID_1.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_REQID_2.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_REQID_3.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_REQID_4.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_REQID_5.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_REQID_6.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_RES_1.py	0	1	0
testcase/DdnsView/test_DDNSVIEW_RES_2.py	1	0	0
testcase/DdnsView/test_DDNSVIEW_RES_3.py	0	1	0
testcase/DdnsView/test_DDNSVIEW_RES_4.py	0	1	0
testcase/DdnsView/test_DDNSVIEW_RES_5.py	0	1	0
testcase/DdnsView/test_DDNS_VIEW_RES_1.py	1	0	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_1.py	1	0	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_234.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_6.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_7.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_8.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_MISS_ATB_1.py	1	0	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_MISS_REQID_1.py	1	0	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_REQID_1.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_REQID_2345.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RESULT_1.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RES_1.py	1	0	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RES_2.py	0	1	0
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RES_3.py	1	0	0
testcase/Discovery/test_DISCOVER_ACT_1.py	0	1	0
testcase/Discovery/test_DISCOVER_ACT_2.py	1	0	0
testcase/Discovery/test_DISCOVER_ACT_345.py	1	0	0
testcase/Discovery/test_DISCOVER_ACT_6.py	1	0	0
testcase/Discovery/test_DISCOVER_ACT_7.py	1	0	0
testcase/Discovery/test_DISCOVER_ACT_8.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_1.py	0	1	0
testcase/Discovery/test_DISCOVER_AUTH_10.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_2.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_3.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_4.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_5.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_6.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_7.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_8.py	1	0	0
testcase/Discovery/test_DISCOVER_AUTH_9.py	1	0	0
testcase/Discovery/test_DISCOVER_MAC_1.py	0	1	0
testcase/Discovery/test_DISCOVER_MAC_2345.py	1	0	0
testcase/Discovery/test_DISCOVER_MISS_ATB.py	1	0	0
testcase/Discovery/test_DISCOVER_MISS_REQID.py	1	0	0
testcase/Discovery/test_DISCOVER_REQID_1.py	0	1	0
testcase/Discovery/test_DISCOVER_REQID_2345.py	1	0	0
testcase/Discovery/test_DISCOVER_RESULT_1.py	0	0	0
testcase/Discovery/test_DISCOVER_RESULT_2.py	0	0	0
testcase/Discovery/test_DISCOVER_RESULT_3.py	0	0	0
testcase/Discovery/test_DISCOVER_RESULT_4.py	0	0	0
testcase/Discovery/test_DISCOVER_RESULT_5.py	0	0	0
testcase/Discovery/test_DISCOVER_RESULT_6.py	0	0	0
testcase/Discovery/test_DISCOVER_RESULT_7.py	0	0	0
testcase/LanEdit/test_LANEDIT_IPADDR_1.py	0	0	0
testcase/LanEdit/test_LANEDIT_IPADDR_2345678.py	0	1	0
testcase/LanEdit/test_LANEDIT_RES_1.py	0	0	0
testcase/LanEdit/test_LANEDIT_SUBNET_1.py	0	0	0
testcase/LanEdit/test_LANEDIT_SUBNET_23.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_1.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_10.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_11.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_12.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_2.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_3.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_4.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_5.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_6.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_7.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_8.py	0	0	1
testcase/Login/CAP/test_LOGIN_AUTH_9.py	0	0	1
testcase/Login/CAP/test_LOGIN_COOKIE_1.py	0	0	1
testcase/Login/CAP/test_LOGIN_COOKIE_2.py	0	0	1
testcase/Login/CAP/test_LOGIN_COOKIE_3.py	0	0	1
testcase/Login/CAP/test_LOGIN_COOKIE_4.py	0	0	1
testcase/Login/CAP/test_LOGIN_COOKIE_5.py	0	0	1
testcase/Login/CAP/test_LOGIN_HSIS_1.py	0	0	0
testcase/Login/CAP/test_LOGIN_HSIS_2.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_1.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_2.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_3.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_4.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_5.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_6.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_7.py	0	0	1
testcase/Login/CAP/test_LOGIN_MD5_8.py	0	0	0
testcase/Login/CAP/test_LOGIN_MD5_9.py	0	0	1
testcase/Login/CAP/test_LOGIN_RES_1.py	0	0	1
testcase/Login/CAP/test_LOGIN_RES_2.py	0	0	1
testcase/Login/CAP/test_LOGIN_RES_3.py	0	0	1
testcase/Login/CAP/test_LOGIN_SES_1.py	0	0	1
testcase/Login/CAP/test_LOGIN_SES_2.py	0	0	1
testcase/Login/CAP/test_LOGIN_SES_3.py	0	0	1
testcase/Login/CAP/test_LOGIN_SES_4.py	0	0	0
testcase/Login/CAP/test_LOGIN_SES_5.py	0	0	0
testcase/Login/CAP/test_LOGIN_SES_6.py	0	0	1
testcase/Login/CAP/test_LOGIN_SES_7.py	0	0	1
testcase/Login/CAP/test_LOGIN_SES_8.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_1.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_10.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_11.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_12.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_13.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_14.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_2.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_3.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_4.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_5.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_6.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_7.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_8.py	0	0	1
testcase/Login/CAP/test_LOGIN_STATUS_9.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_1.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_2.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_3.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_4.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_5.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_6.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_7.py	0	0	1
testcase/Logout/test_LOGOUT_ACT_8.py	0	0	1
testcase/Logout/test_LOGOUT_MISS_ATTB.py	0	0	1
testcase/Logout/test_LOGOUT_MISS_REQID.py	0	0	1
testcase/Logout/test_LOGOUT_REQID_1.py	0	0	1
testcase/Logout/test_LOGOUT_REQID_2.py	0	0	1
testcase/Logout/test_LOGOUT_REQID_3.py	0	0	1
testcase/Logout/test_LOGOUT_REQID_4.py	0	0	1
testcase/Logout/test_LOGOUT_REQID_5.py	0	0	1
testcase/Logout/test_LOGOUT_REQID_6.py	0	0	1
testcase/Logout/test_LOGOUT_RES_1.py	0	0	1
testcase/Logout/test_LOGOUT_RES_2.py	0	0	1
testcase/Logout/test_LOGOUT_RES_3.py	0	0	1
testcase/Logout/test_LOGOUT_SES_1.py	0	0	1
testcase/Logout/test_LOGOUT_SES_2.py	0	0	1
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_BRIGDE_TO_BRIGDE.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_BRIGDE_TO_REPEATER.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_BRIGDE_TO_ROUTER.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_REPEATER_TO_BRIGDE.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_REPEATER_TO_REPEATER.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_REPEATER_TO_ROUTER.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_ROUTER_TO_BRIGDE.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_ROUTER_TO_REPEATER.py	0	0	0
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_ROUTER_TO_ROUTER.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_MAIN_SSIDNAME_AND_PASS_1.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_REPEATER_SSIDNAME_AND_PASS_1.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_1_ROUTER.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_2_BRIDGE_MODE.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_3_REPEATER_2G_OPEN.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_4_REPEATER_5G_OPEN.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_5_REPEATER_2G_PASS.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_6_REPEATER_5G_PASS.py	0	1	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_7_REPEATER_2G_PASS.py	0	0	0
testcase/MeshCreate/test_MESH_CREATE_RESULT_8_REPEATER_5G_PASS.py	0	0	0
testcase/MeshView/test_MESH_VIEW_RESULT_1_FAC.py	0	0	1
testcase/MeshView/test_MESH_VIEW_RESULT_1_ROUTER.py	0	0	1
testcase/MeshView/test_MESH_VIEW_RESULT_2_BRIDGE_MODE.py	0	0	0
testcase/MeshView/test_MESH_VIEW_RESULT_3_REPEATER_2G_OPEN.py	0	0	1
testcase/NetworkInfoView/test_NETINFO_VIEW_REQID_1.py	0	0	1
testcase/NetworkInfoView/test_NETINFO_VIEW_REQID_2.py	0	0	1
testcase/NetworkInfoView/test_NETINFO_VIEW_REQID_23456.py	0	0	1
testcase/NetworkInfoView/test_NETINFO_VIEW_RESULT_1.py	0	0	0
testcase/NetworkInfoView/test_NETINFO_VIEW_RESULT_2.py	0	0	0
testcase/NetworkInfoView/test_NETINFO_VIEW_RES_1.py	0	0	1
testcase/NetworkInfoView/test_NETINFO_VIEW_RES_2.py	0	0	1
testcase/NetworkInfoView/test_NETINFO_VIEW_RES_3.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_1.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_2.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_3.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_4.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_5.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_6.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_7.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_MISS_ATTB.py	0	0	1
testcase/NetworkInfoView/test_NET_INFO_VIEW_MISS_REQID.py	0	0	1
testcase/OpenSession/test_OPEN_ACT_1.py	1	0	0
testcase/OpenSession/test_OPEN_ACT_2.py	1	0	0
testcase/OpenSession/test_OPEN_ACT_3.py	1	0	0
testcase/OpenSession/test_OPEN_ACT_4.py	1	0	0
testcase/OpenSession/test_OPEN_ACT_5.py	1	0	0
testcase/OpenSession/test_OPEN_ACT_6.py	1	0	0
testcase/OpenSession/test_OPEN_ACT_7.py	1	0	0
testcase/OpenSession/test_OPEN_ACT_8.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_1.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_10.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_2.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_3.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_4.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_5.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_6.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_7.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_8.py	1	0	0
testcase/OpenSession/test_OPEN_AUTH_9.py	1	0	0
testcase/OpenSession/test_OPEN_MAC_1.py	1	0	0
testcase/OpenSession/test_OPEN_MAC_2.py	1	0	0
testcase/OpenSession/test_OPEN_MAC_3.py	1	0	0
testcase/OpenSession/test_OPEN_MAC_4.py	1	0	0
testcase/OpenSession/test_OPEN_MAC_5.py	1	0	0
testcase/OpenSession/test_OPEN_MAC_6.py	1	0	0
testcase/OpenSession/test_OPEN_MAC_7.py	1	0	0
testcase/OpenSession/test_OPEN_MESH_ONLY_12.py	0	0	0
testcase/OpenSession/test_OPEN_MISS_ATTB.py	1	0	0
testcase/OpenSession/test_OPEN_MISS_REQID.py	0	1	0
testcase/OpenSession/test_OPEN_Mesh_ONT_123.py	0	0	0
testcase/OpenSession/test_OPEN_REQID_1.py	1	0	0
testcase/OpenSession/test_OPEN_REQID_2.py	1	0	0
testcase/OpenSession/test_OPEN_REQID_3.py	1	0	0
testcase/OpenSession/test_OPEN_REQID_4.py	1	0	0
testcase/OpenSession/test_OPEN_REQID_5.py	1	0	0
testcase/OpenSession/test_OPEN_REQID_6.py	1	0	0
testcase/OpenSession/test_OPEN_TIME_1.py	1	0	0
testcase/OpenSession/test_OPEN_TIME_2.py	1	0	0
testcase/OpenSession/test_OPEN_TIME_3.py	1	0	0
testcase/OpenSession/test_OPEN_TIME_4.py	1	0	0
testcase/OpenSession/test_OPEN_TIME_5.py	1	0	0
testcase/OpenSession/test_OPEN_TIME_6.py	1	0	0
testcase/PasswordEdit/test_PASSEDIT_ACT_1.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_ACT_2.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_ACT_3.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_ACT_4.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_ACT_5.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_ACT_678.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_MISS_ATTB.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_MISS_REQID.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_REQID_1.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_REQID_23456.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_RES_1.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_RES_2.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_RES_3.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_RULE_101112.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_RULE_123456789.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_RULE_131415.py	0	0	1
testcase/PasswordEdit/test_PASSEDIT_RULE_161718192021.py	0	0	1
testcase/Ping/test_PING_ACT_1.py	0	0	1
testcase/Ping/test_PING_ACT_2.py	0	0	1
testcase/Ping/test_PING_ACT_3.py	0	0	1
testcase/Ping/test_PING_ACT_4.py	0	0	1
testcase/Ping/test_PING_ACT_5.py	0	0	1
testcase/Ping/test_PING_ACT_6.py	0	0	1
testcase/Ping/test_PING_ACT_7.py	0	0	1
testcase/Ping/test_PING_ACT_8.py	0	0	1
testcase/Ping/test_PING_CODE_1.py	0	0	1
testcase/Ping/test_PING_CODE_2.py	0	0	1
testcase/Ping/test_PING_CODE_3.py	0	0	1
testcase/Ping/test_PING_CODE_4.py	0	0	1
testcase/Ping/test_PING_CODE_5.py	0	0	1
testcase/Ping/test_PING_HOST_1.py	0	0	1
testcase/Ping/test_PING_HOST_2.py	0	0	1
testcase/Ping/test_PING_HOST_3.py	0	0	1
testcase/Ping/test_PING_HOST_4.py	0	0	1
testcase/Ping/test_PING_HOST_5.py	0	0	1
testcase/Ping/test_PING_HOST_6.py	0	0	1
testcase/Ping/test_PING_HOST_7.py	0	0	1
testcase/Ping/test_PING_HOST_8.py	0	0	1
testcase/Ping/test_PING_HOST_9.py	0	0	1
testcase/Ping/test_PING_MISS_ATTB.py	0	0	1
testcase/Ping/test_PING_MISS_REQID.py	0	0	1
testcase/Ping/test_PING_REQID_1.py	0	0	1
testcase/Ping/test_PING_REQID_2.py	0	0	1
testcase/Ping/test_PING_REQID_3.py	0	0	1
testcase/Ping/test_PING_REQID_4.py	0	0	1
testcase/Ping/test_PING_REQID_5.py	0	0	1
testcase/Ping/test_PING_REQID_6.py	0	0	1
testcase/Ping/test_PING_RES_1.py	0	0	1
testcase/Ping/test_PING_RES_2.py	0	0	1
testcase/Ping/test_PING_RES_3.py	0	0	1
testcase/Ping/test_PING_RES_RESULT_1.py	0	0	1
testcase/Ping/test_PING_RES_RESULT_2.py	0	0	1
testcase/Ping/test_PING_RES_RESULT_3.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_ACT_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_ACT_2345.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_ACT_678.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_INDEX_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_INDEX_23456.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_IPADDR_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_IPADDR_23.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_MISS_ATTB.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_MISS_REQID.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_PROTOCOL_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_PROTOCOL_2345.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_REQID_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_REQID_23456.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_RES_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_RES_2.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_RES_3.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_SERVICENAME_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_SERVICENAME_23456.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_SERVICENAME_7.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_STARTLOPORT_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_STARTLOPORT_23456.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_STARTREPORT_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_STARTREPORT_23456.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_WANINDEX_1.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_WANINDEX_23456.py	0	0	1
testcase/PortforwardCreate/test_PORT_CREATE_schema.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_ACT_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_ACT_2345.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_ACT_678.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_INDEX_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_INDEX_23456.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_INDEX_7.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_IPADDR_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_IPADDR_23.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_MISS_ATTB.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_MISS_REQID.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_PROTOCOL_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_PROTOCOL_2345.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_REQID_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_REQID_23456.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_RES_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_RES_2.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_RES_3.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_SERVICENAME.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_STARTLOCALPORT_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_STARTLOCALPORT_23456.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_STARTREPORT_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_STARTREPORT_23456.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_WANINDEX_1.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_WANINDEX_23456.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_WANINDEX_7.py	0	0	1
testcase/PortforwardEdit/test_PORT_EDIT_schema.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_ACT_1.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_ACT_2345.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_ACT_678.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_INDEX_1.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_INDEX_23456.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_INDEX_7.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_MISS_ATTB.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_MISS_REQID.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_REQID_1.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_REQID_23456.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_RES_1.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_RES_2.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_RES_3.py	0	0	1
testcase/PortforwardRemove/test_PORT_REMOVE_SCHEMA.py	0	0	1
testcase/PortforwardView/test_PFVIEW_ACT_1.py	0	0	1
testcase/PortforwardView/test_PFVIEW_ACT_2345.py	0	0	1
testcase/PortforwardView/test_PFVIEW_ACT_678.py	0	0	1
testcase/PortforwardView/test_PFVIEW_MISS_ATTB.py	0	0	1
testcase/PortforwardView/test_PFVIEW_MISS_REQID.py	0	0	1
testcase/PortforwardView/test_PFVIEW_REQID_1.py	0	0	1
testcase/PortforwardView/test_PFVIEW_REQID_23456.py	0	0	1
testcase/PortforwardView/test_PFVIEW_RES_1.py	0	0	1
testcase/PortforwardView/test_PFVIEW_RES_2.py	0	0	1
testcase/PortforwardView/test_PFVIEW_RES_3.py	0	0	1
testcase/PortforwardView/test_PFVIEW_Schema.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_ACT_23458.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_ACT_6.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_ACT_7.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_G_INVALID_2040MHz.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_G_INVALID_40MHz.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_G_VALID.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_NG_INVALID.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_NG_VALID.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_3456.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_7.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_8.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_9.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BOTH_1_STAND_G.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_BOTH_1_STAND_NG.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_1.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_23.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_4.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_5.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_6.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_MISS_ATTB.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_MISS_ATTB_CHANNEL_OR_BW.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_MISS_REQID.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_REQID_1.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_REQID_2345.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_RES_1.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_RES_2.py	0	0	1
testcase/Radio2GEdit/test_RADIO24G_EDIT_RES_3.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_1.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_23458.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_6.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_7.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11AC_CH165_InValid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11AC_CH165_Valid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11AC_Valid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11A_InValid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11A_Valid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_CH165_InValid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_CH165_Valid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_InValid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_Valid.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_6789.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BOTH_1_STAND_11A.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BOTH_1_STAND_11AC.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_BOTH_1_STAND_11NA.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_1.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_234.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_5.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_6.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_MISS_ATTB.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_MISS_ATTB_CHANNEL_BW.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_MISS_REQID.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_REQID_1.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_REQID_23456.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_RES_1.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_RES_2.py	0	0	1
testcase/Radio5GEdit/test_RADIO5G_EDIT_RES_3.py	0	0	1
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_1.py	0	0	0
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_2.py	0	0	1
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_3.py	0	0	1
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_4.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_1.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_2.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_3.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_4.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_5.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_6.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_7.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_ACT_8.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_MISS_ATTB.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_MISS_REQID.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_REQID_1.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_REQID_2.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_REQID_3.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_REQID_4.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_REQID_5.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_REQID_6.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_RES_1.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_RES_2.py	0	0	1
testcase/Radio5GView/test_RADIO_5G_RES_3.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_1.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_2.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_3.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_4.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_5.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_6.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_7.py	0	0	1
testcase/Reboot/test_REBOOT_ACT_8.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_1011.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_12.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_13.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_14.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_15.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_16.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_17.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_3.py	0	0	0
testcase/Reboot/test_REBOOT_MACLST_4.py	0	0	0
testcase/Reboot/test_REBOOT_MACLST_5.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_678.py	0	0	1
testcase/Reboot/test_REBOOT_MACLST_9.py	0	0	1
testcase/Reboot/test_REBOOT_MESH_ONLY_1_CAP.py	0	0	1
testcase/Reboot/test_REBOOT_MESH_ONLY_2_MRE.py	0	0	1
testcase/Reboot/test_REBOOT_MESH_ONLY_3_BOTH.py	0	0	1
testcase/Reboot/test_REBOOT_MESH_ONLY_4_MRE.py	0	0	0
testcase/Reboot/test_REBOOT_MISS_ATTB.py	0	0	1
testcase/Reboot/test_REBOOT_MISS_REQID.py	0	0	1
testcase/Reboot/test_REBOOT_REQID_1.py	1	0	0
testcase/Reboot/test_REBOOT_REQID_2.py	1	0	0
testcase/Reboot/test_REBOOT_REQID_3.py	1	0	0
testcase/Reboot/test_REBOOT_REQID_4.py	1	0	0
testcase/Reboot/test_REBOOT_REQID_5.py	1	0	0
testcase/Reboot/test_REBOOT_REQID_6.py	1	0	0
testcase/Reset/test_RESET_ACT_1.py	0	0	1
testcase/Reset/test_RESET_ACT_2345.py	0	0	1
testcase/Reset/test_RESET_ACT_6.py	0	0	1
testcase/Reset/test_RESET_ACT_7.py	0	0	1
testcase/Reset/test_RESET_ACT_8.py	0	0	1
testcase/Reset/test_RESET_MACLST_1011.py	0	0	1
testcase/Reset/test_RESET_MACLST_12.py	0	0	1
testcase/Reset/test_RESET_MACLST_13.py	0	0	1
testcase/Reset/test_RESET_MACLST_14.py	0	0	1
testcase/Reset/test_RESET_MACLST_15.py	0	0	1
testcase/Reset/test_RESET_MACLST_16.py	0	0	1
testcase/Reset/test_RESET_MACLST_17.py	0	0	1
testcase/Reset/test_RESET_MACLST_3.py	0	0	0
testcase/Reset/test_RESET_MACLST_4.py	0	0	0
testcase/Reset/test_RESET_MACLST_5.py	0	0	0
testcase/Reset/test_RESET_MACLST_678.py	0	0	1
testcase/Reset/test_RESET_MACLST_9.py	0	0	1
testcase/Reset/test_RESET_MESH_ONLY_1_CAP.py	0	0	0
testcase/Reset/test_RESET_MESH_ONLY_2_MRE.py	0	0	0
testcase/Reset/test_RESET_MESH_ONLY_3_BOTH.py	0	0	0
testcase/Reset/test_RESET_REQID_23456.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_1.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_2.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_3.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_4.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_5.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_6.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_7.py	0	0	1
testcase/SpeedTest/test_SPEED_ACT_8.py	0	0	1
testcase/SpeedTest/test_SPEED_MISS_ATTB.py	0	0	1
testcase/SpeedTest/test_SPEED_MISS_REQID.py	0	0	1
testcase/SpeedTest/test_SPEED_REQ_1.py	0	0	1
testcase/SpeedTest/test_SPEED_REQ_2.py	0	0	1
testcase/SpeedTest/test_SPEED_REQ_3456.py	0	0	1
testcase/SpeedTest/test_SPEED_RES_1.py	0	0	1
testcase/SpeedTest/test_SPEED_RES_2.py	0	0	1
testcase/SpeedTest/test_SPEED_RES_3.py	0	0	1
testcase/SpeedTest/test_SPEED_RES_MESH_ONLY_1.py	1	0	0
testcase/SpeedTest/test_SPEED_RES_MESH_ONLY_2.py	0	0	0
testcase/SpeedTest/test_SPEED_RES_MESH_ONLY_3.py	0	0	0
testcase/Ssid2GEdit/test_SSID2G_EDIT_GUEST_NAME_1.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_GUEST_PASS_1.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_NAME_1.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_NAME_23456.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_1.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_23456.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_346.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_5.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_1_MODE_pass.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_2_MODE_open_Enable_true.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_3_MODE_open_Enable_false.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_4_MODE_pass_Enable_true.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_5_MODE_pass_Enable_false.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_6_MODE_open.py	0	0	1
testcase/Ssid2GEdit/test_SSID2G_EDIT_RES_1.py	0	0	1
testcase/Ssid2GEdit/test_SSID5G_EDIT_RESULT_7.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_ACT_1.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_ACT_2345.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_ACT_678.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_MISS_ATTB.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_MISS_REQID.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_REQID_1.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_REQID_23456.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_RES_1.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_RES_2.py	0	0	1
testcase/Ssid2GView/test_SSID2GVIEW_RES_3.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_GUEST_NAME_1.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_GUEST_PASS_1.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_NAME_1.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_NAME_23456.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_1.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_23456.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_346.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_5.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_1_MODE_pass.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_2_MODE_open_Enable_true.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_3_MODE_open_Enable_false.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_4_MODE_pass_Enable_true.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_5_MODE_pass_Enable_false.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_6_MODE_open.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_7.py	0	0	1
testcase/Ssid5GEdit/test_SSID5G_EDIT_RES_1.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_ACT_1.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_ACT_2345.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_ACT_678.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_MISS_ATTB.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_MISS_REQID.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_REQID_1.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_REQID_23456.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_RES_1.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_RES_2.py	0	0	1
testcase/Ssid5GView/test_SSID5GVIEW_RES_3.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_ACT_1.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_ACT_2345.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_ACT_8.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_ENABLE_234567.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_MISS_ATTB.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_MISS_REQID.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_REQID_1.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_REQID_2345.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_RESULT_1_FALSE.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_RESULT_1_TRUE.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_RES_1.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_RES_2.py	0	0	1
testcase/SyncONTConfig/test_SYNC_ONT_RES_3.py	0	0	1
testcase/Topology/test_TOPO_ACT_1.py	0	0	1
testcase/Topology/test_TOPO_ACT_2345.py	0	0	1
testcase/Topology/test_TOPO_ACT_6.py	0	0	1
testcase/Topology/test_TOPO_ACT_7.py	0	0	1
testcase/Topology/test_TOPO_ACT_8.py	0	0	1
testcase/Topology/test_TOPO_ACT_MISS_ATTB.py	0	0	1
testcase/Topology/test_TOPO_ACT_MISS_REQID.py	0	0	1
testcase/Topology/test_TOPO_REQID_1.py	0	0	1
testcase/Topology/test_TOPO_REQID_2345.py	0	0	1
testcase/Topology/test_TOPO_RESULT_CAP_ONLY_1.py	0	0	1
testcase/Topology/test_TOPO_RES_1.py	0	0	1
testcase/Topology/test_TOPO_RES_2.py	0	0	1
testcase/Topology/test_TOPO_RES_3.py	0	0	1
testcase/Topology/test_TOPOlogy_Schema.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_ACT_1.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_ACT_2345.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_ACT_6.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_ACT_7.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_ACT_8.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_CODE_23.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_CODE_4.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_CODE_5.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_1.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_23.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_4.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_5.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_6.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_7.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_8.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_HOST_9.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_MESH_ONLY_1.py	0	1	0
testcase/TraceRoute/test_TRACE_ROUTE_MISS_ATTB.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_MISS_REQID.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_REQID_1.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_REQID_23456.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_1.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_2.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_3.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_4.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_RES_1.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_RES_2.py	0	0	1
testcase/TraceRoute/test_TRACE_ROUTE_RES_3.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_10.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_1_1.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_1_2.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_2.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_2_.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_5.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_7.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_8.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_1_DHCP_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_2_DHCP_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_3_DHCP_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_4_STATIC_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_5_STATIC_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_6_STATIC_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_7_L2TP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPPoE_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPPoE_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPPoE_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPTP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_8_ALL_WAN.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RESULT_9_ALL_WAN.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_RES_1.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_USERNAME_1.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_USERNAME_1_L2TP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_USERNAME_1_PPPoE_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_USERNAME_1_PPTP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_USERNAME_2.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_USERNAME_3456.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_VLANID_1.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_VLANID_23456.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WANIDX_23456.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_DHCP_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_DHCP_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_DHCP_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_L2TP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPPoE_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPPoE_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPPoE_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPTP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_STATIC_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_STATIC_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_2_STATIC_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_DHCP_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_DHCP_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_DHCP_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_L2TP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPPoE_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPPoE_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPPoE_IPv6.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPTP.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_STATIC_Dual.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_STATIC_IPv4.py	0	0	1
testcase/WanCreate/test_WAN_CREATE_WAN_3_STATIC_IPv6.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_DHCP_IPv4_1.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_PPPoE_Dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_PPPoE_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_STATIC_Dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_DHCP_Dual_1.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_PPPoE_Dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_PPPoE_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_STATIC_Dual_1.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_EXCEPTION_4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_L2TP_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_L2TP_To_DHCP_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_L2TP_To_PPPoE_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_L2TP_To_PPPoE_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_L2TP_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_L2TP_To_STATIC_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_L2TP_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_MISS_ATB_DHCP_Dual_To_DHCP_IPv4_1.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_MISS_ATB_DHCP_Dual_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPOE_Dual_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPOE_ipv4_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_DHCP_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_PPPoE_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_STATIC_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_DHCP_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_PPPoE_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_STATIC_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPTP_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPTP_To_DHCP_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPTP_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPTP_To_PPPoE_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPTP_To_PPPoE_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPTP_To_STATIC_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_PPTP_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_DHCP_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_PPPoE_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_PPPoE_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_STATIC_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_DHCP_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_PPPoE_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_PPPoE_ipv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_STATIC_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_DHCP_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_DHCP_IPv6.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_PPPoE_Dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_PPPoE_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_STATIC_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_STATIC_IPv6.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN0_To_STATIC_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_DHCP_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_DHCP_IPv6.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_PPPoE_Dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_PPPoE_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_STATIC_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_STATIC_IPv6.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN2_To_STATIC_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_DHCP_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_DHCP_IPv6.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_DHCP_dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_L2TP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_PPPoE_Dual.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_PPPoE_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_PPTP.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_STATIC_IPv4.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_STATIC_IPv6.py	0	0	1
testcase/WanEdit/test_WAN_EDIT_WAN3_To_STATIC_dual.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_1.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_2.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_3.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_4.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_5.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_6.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_7.py	0	0	1
testcase/lanView/test_LANVIEW_ACT_8.py	0	0	1
testcase/lanView/test_LANVIEW_MISS_ATTB.py	0	0	1
testcase/lanView/test_LANVIEW_MISS_REQID.py	0	0	1
testcase/lanView/test_LANVIEW_REQID_1.py	0	0	1
testcase/lanView/test_LANVIEW_REQID_2.py	0	0	1
testcase/lanView/test_LANVIEW_REQID_3.py	0	0	1
testcase/lanView/test_LANVIEW_REQID_4.py	0	0	1
testcase/lanView/test_LANVIEW_REQID_5.py	0	0	1
testcase/lanView/test_LANVIEW_REQID_6.py	0	0	1
testcase/lanView/test_LANVIEW_RESULT_1.py	0	0	1
testcase/lanView/test_LANVIEW_RES_1.py	0	0	1
testcase/lanView/test_LANVIEW_RES_2.py	0	0	1
testcase/lanView/test_LANVIEW_RES_3.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_1.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_2.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_3.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_4.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_5.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_6.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_7.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_ACT_8.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_MISS_ATTB.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_MISS_REQID.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_REQID_1.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_REQID_2.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_REQID_3.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_REQID_4.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_REQID_5.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_REQID_6.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_RES_1.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_RES_2.py	0	0	1
testcase/radio2GView/test_RADIO24GVIEW_RES_3.py	0	0	1
testcase/radio2GView/test_RADIO2GVIEW_RESULT_1.py	0	0	0
testcase/radio2GView/test_RADIO2GVIEW_RESULT_2.py	0	0	1
testcase/radio2GView/test_RADIO2GVIEW_RESULT_3.py	0	0	1
testcase/radio2GView/test_RADIO2GVIEW_RESULT_4.py	0	0	1
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_1.py	0	0	0
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_2.py	0	0	0
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_3.py	0	0	0
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_4.py	0	0	0
testcase/wanRemove/test_WANREMOVE_IDX_5.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_123.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_132.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_213.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_231.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_312.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_321.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_7.py	0	0	1
testcase/wanRemove/test_WANREMOVE_RES_8_REWAN0.py	0	0	1
testcase/wanRemove/test_WANREMOVE_REWAN1_ADD_WAN1.py	0	0	1
testcase/wanRemove/test_WANREMOVE_REWAN1_ADD_WAN23.py	0	0	1
testcase/wanRemove/test_WANREMOVE_REWAN2_ADD_WAN13.py	0	0	1
testcase/wanRemove/test_WANREMOVE_REWAN2_ADD_WAN2.py	0	0	1
testcase/wanRemove/test_WANREMOVE_REWAN3_ADD_WAN12.py	0	0	1
testcase/wanRemove/test_WANREMOVE_REWAN3_ADD_WAN3.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_1.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_2.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_3.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_4.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_5.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_6.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_7.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_ACT_8.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_MISS_ATTB.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_MISS_REQID.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_REQID_1.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_REQID_2.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_REQID_3.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_REQID_4.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_REQID_5.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_REQID_6.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_RES_1.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_RES_2.py	0	0	1
testcase/wanViewConfig/test_WANVIEW_RES_3.py	0	0	1

Suite	Test Case	Status	Time (s)	Error Message
testcase/AddNewNode/test_ADD_NEWNODE_ACT_1.py	test_TOPO_ACT_1	PASS	668.28
testcase/AddNewNode/test_ADD_NEWNODE_ACT_2345.py	test_TOPO_ADD_NEWNODE_1	PASS	49.61
testcase/AddNewNode/test_ADD_NEWNODE_MISS_ATTB.py	test_TOPO_ADD_NEWNODE_1	PASS	34.37
testcase/AddNewNode/test_ADD_NEWNODE_MISS_REQID.py	test_TOPO_ADD_NEWNODE_1	PASS	34.34
testcase/AddNewNode/test_ADD_NEWNODE_REQID_1.py	test_TRACE_ROUTE_RES_1	FAIL	636.78	AttributeError: 'Test_TraceRoute' object has no (...) AttributeError: 'Test_TraceRoute' object has no attribute 'traceClt'
testcase/AddNewNode/test_ADD_NEWNODE_REQID_2345.py	test_ADD_NEW_NODE_RES_1	PASS	35.16
testcase/AddNewNode/test_ADD_NEWNODE_RESULT_1.py	test_TOPO_ACT_1	SKIP	35.17	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\AddNewNode\\test_ADD_NEWNODE_RESULT_1.py', 15, 'Skipped: This is Manual Testcase')
testcase/AddNewNode/test_ADD_NEWNODE_RESULT_2.py	test_TOPO_ACT_1	SKIP	35.18	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\AddNewNode\\test_ADD_NEWNODE_RESULT_2.py', 15, 'Skipped: This is Manual Testcase')
testcase/AddNewNode/test_ADD_NEWNODE_RESULT_3.py	test_TOPO_ACT_1	SKIP	35.19	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\AddNewNode\\test_ADD_NEWNODE_RESULT_3.py', 15, 'Skipped: This is Manual Testcase')
testcase/AddNewNode/test_ADD_NEWNODE_RES_1.py	test_TOPO_ACT_1	FAIL	187.33	AttributeError: 'Test_Topology' object has no a (...) AttributeError: 'Test_Topology' object has no attribute 'addClt'
testcase/DdnsCreate/test_DDNSCREAT_ACT_1.py	test_DDNSVIEW_ACT_1	FAIL	34.66	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_ACT_2.py	test_DDNSVIEW_ACT_2	PASS	34.62
testcase/DdnsCreate/test_DDNSCREAT_ACT_3.py	test_DDNSVIEW_ACT_3	PASS	34.75
testcase/DdnsCreate/test_DDNSCREAT_ACT_4.py	test_DDNSVIEW_ACT_4	PASS	34.3
testcase/DdnsCreate/test_DDNSCREAT_ACT_5.py	test_DDNSVIEW_ACT_5	PASS	34.3
testcase/DdnsCreate/test_DDNSCREAT_ACT_6.py	test_DDNSVIEW_ACT_6	PASS	36.95
testcase/DdnsCreate/test_DDNSCREAT_ACT_7.py	test_DDNSVIEW_ACT_7	PASS	38.45
testcase/DdnsCreate/test_DDNSCREAT_ACT_8.py	test_DDNSVIEW_ACT_8	PASS	35.65
testcase/DdnsCreate/test_DDNSCREAT_HOST_1.py	test_DDNSEDIT_RES_HOST_1	PASS	40.05
testcase/DdnsCreate/test_DDNSCREAT_HOST_10.py	test_DDNSEDIT_RES_HOST_1	FAIL	37.26	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"0> to be equal to <"11>, but was not. 2. [MESSAGE ERROR] Expected <"Success> to be equal to <"Verify Fail>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_HOST_2.py	test_DDNSEDIT_RES_HOST_1	PASS	34.63
testcase/DdnsCreate/test_DDNSCREAT_HOST_3.py	test_DDNSEDIT_RES_HOST_1	PASS	33.28
testcase/DdnsCreate/test_DDNSCREAT_HOST_4.py	test_DDNSEDIT_RES_HOST_1	PASS	34.85
testcase/DdnsCreate/test_DDNSCREAT_HOST_5.py	test_DDNSEDIT_RES_HOST_1	FAIL	37.38	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_HOST_6.py	test_DDNSEDIT_RES_HOST_1	PASS	34.66
testcase/DdnsCreate/test_DDNSCREAT_HOST_7.py	test_DDNSEDIT_RES_HOST_1	PASS	35.25
testcase/DdnsCreate/test_DDNSCREAT_HOST_8.py	test_DDNSEDIT_RES_HOST_1	PASS	38.44
testcase/DdnsCreate/test_DDNSCREAT_HOST_9.py	test_DDNSEDIT_RES_HOST_1	PASS	34.27
testcase/DdnsCreate/test_DDNSCREAT_INDEX_1.py	test_DDNSCREATE_INDEX_1	FAIL	58.3	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not. 3. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 4. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_INDEX_2.py	test_DDNSCREATE_INDEX_1	PASS	34.28
testcase/DdnsCreate/test_DDNSCREAT_INDEX_3.py	test_DDNSCREATE_INDEX_1	PASS	34.31
testcase/DdnsCreate/test_DDNSCREAT_INDEX_4.py	test_DDNSCREATE_INDEX_1	PASS	34.38
testcase/DdnsCreate/test_DDNSCREAT_INDEX_5.py	test_DDNSCREATE_INDEX_1	PASS	34.27
testcase/DdnsCreate/test_DDNSCREAT_INDEX_6.py	test_DDNSCREATE_INDEX_1	PASS	34.34
testcase/DdnsCreate/test_DDNSCREAT_INDEX_7.py	test_DDNSCREATE_INDEX_1	FAIL	34.27	AttributeError: 'Test_DdnsCreate' object has no (...) AttributeError: 'Test_DdnsCreate' object has no attribute 'serProvider2'
testcase/DdnsCreate/test_DDNSCREAT_INDEX_8.py	test_DDNSCREATE_INDEX_1	FAIL	34.28	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"12>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Unknown Error>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_PROVIDER_1.py	test_DDNSEDIT_PROVIDER_1	FAIL	37.38	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_PROVIDER_2.py	test_DDNSEDIT_PROVIDER_1	PASS	34.83
testcase/DdnsCreate/test_DDNSCREAT_REQID_1.py	test_DDNSCREATE_REQID_1	FAIL	37.46	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_REQID_2.py	test_DDNSCREATE_REQID_1	PASS	34.25
testcase/DdnsCreate/test_DDNSCREAT_REQID_3.py	test_DDNSCREATE_REQID_1	PASS	34.32
testcase/DdnsCreate/test_DDNSCREAT_REQID_4.py	test_DDNSCREATE_REQID_1	PASS	34.43
testcase/DdnsCreate/test_DDNSCREAT_REQID_5.py	test_DDNSCREATE_REQID_1	PASS	34.29
testcase/DdnsCreate/test_DDNSCREAT_REQID_6.py	test_DDNSCREATE_REQID_1	PASS	34.22
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_1.py	test_DDNSCREATE_USRPWD_1	FAIL	37.32	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_2.py	test_DDNSCREATE_USRPWD_1	PASS	35.45
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_3.py	test_DDNSCREATE_USRPWD_1	PASS	34.27
testcase/DdnsCreate/test_DDNSCREAT_USRPWD_4.py	test_DDNSCREATE_USRPWD_1	FAIL	34.57	AttributeError: 'Test_DdnsCreate' object has no (...) AttributeError: 'Test_DdnsCreate' object has no attribute 'ddnsEditClt'
testcase/DdnsCreate/test_DDNS_CREATE_RES_1.py	test_ddnsCreate_RES_1	FAIL	42.35	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNS_CREATE_RES_2.py	test_ddnsCreate_RES_1	FAIL	622.3	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsCreate/test_DDNS_CREATE_RES_3.py	test_ddnsCreate_RES_1	PASS	642.24
testcase/DdnsEdit/test_DDNSEDIT_ACT_2.py	test_DDNSVIEW_ACT_2	PASS	34.67
testcase/DdnsEdit/test_DDNSEDIT_ACT_3.py	test_DDNSVIEW_ACT_3	PASS	34.57
testcase/DdnsEdit/test_DDNSEDIT_ACT_4.py	test_DDNSVIEW_ACT_4	PASS	34.38
testcase/DdnsEdit/test_DDNSEDIT_ACT_5.py	test_DDNSVIEW_ACT_5	PASS	34.33
testcase/DdnsEdit/test_DDNSEDIT_ACT_6.py	test_DDNSVIEW_ACT_6	PASS	36.87
testcase/DdnsEdit/test_DDNSEDIT_ACT_7.py	test_DDNSVIEW_ACT_7	PASS	38.57
testcase/DdnsEdit/test_DDNSEDIT_ACT_8.py	test_DDNSVIEW_ACT_8	PASS	34.64
testcase/DdnsEdit/test_DDNSEDIT_HOST_1.py	test_DDNSEDIT_HOST_1	PASS	48.63
testcase/DdnsEdit/test_DDNSEDIT_HOST_10.py	test_DDNSEDIT_RES_HOST_1	FAIL	43.53	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"0> to be equal to <"11>, but was not. 2. [MESSAGE ERROR] Expected <"Success> to be equal to <"Verify Fail>, but was not.
testcase/DdnsEdit/test_DDNSEDIT_HOST_2.py	test_DDNSEDIT_RES_HOST_1	PASS	34.53
testcase/DdnsEdit/test_DDNSEDIT_HOST_3.py	test_DDNSEDIT_RES_HOST_1	PASS	34.49
testcase/DdnsEdit/test_DDNSEDIT_HOST_4.py	test_DDNSEDIT_RES_HOST_1	PASS	34.86
testcase/DdnsEdit/test_DDNSEDIT_HOST_5.py	test_DDNSEDIT_RES_HOST_1	PASS	40.1
testcase/DdnsEdit/test_DDNSEDIT_HOST_6.py	test_DDNSEDIT_RES_HOST_1	PASS	34.79
testcase/DdnsEdit/test_DDNSEDIT_HOST_7.py	test_DDNSEDIT_RES_HOST_1	PASS	35.52
testcase/DdnsEdit/test_DDNSEDIT_HOST_8.py	test_DDNSEDIT_RES_HOST_1	PASS	38.74
testcase/DdnsEdit/test_DDNSEDIT_HOST_9.py	test_DDNSEDIT_RES_HOST_1	PASS	34.26
testcase/DdnsEdit/test_DDNSEDIT_INDEX_1.py	test_DDNSEDIT_INDEX_1	PASS	65.06
testcase/DdnsEdit/test_DDNSEDIT_INDEX_2.py	test_DDNSEDIT_INDEX_1	PASS	34.27
testcase/DdnsEdit/test_DDNSEDIT_INDEX_3.py	test_DDNSEDIT_INDEX_1	PASS	34.85
testcase/DdnsEdit/test_DDNSEDIT_INDEX_4.py	test_DDNSEDIT_INDEX_1	PASS	34.37
testcase/DdnsEdit/test_DDNSEDIT_INDEX_5.py	test_DDNSEDIT_INDEX_1	PASS	34.26
testcase/DdnsEdit/test_DDNSEDIT_INDEX_6.py	test_DDNSEDIT_INDEX_1	PASS	34.3
testcase/DdnsEdit/test_DDNSEDIT_INDEX_7.py	test_DDNSEDIT_INDEX_1	FAIL	37.24	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"0> to be equal to <"12>, but was not. 2. [MESSAGE ERROR] Expected <"Success> to be equal to <"Unknown Error>, but was not.
testcase/DdnsEdit/test_DDNSEDIT_PROVIDER_1.py	test_DDNSEDIT_PROVIDER_1	PASS	64.72
testcase/DdnsEdit/test_DDNSEDIT_PROVIDER_2.py	test_DDNSEDIT_PROVIDER_1	PASS	34.78
testcase/DdnsEdit/test_DDNSEDIT_REQID_1.py	test_DDNSEDIT_REQID_1	PASS	65.36
testcase/DdnsEdit/test_DDNSEDIT_REQID_2.py	test_DDNSEDIT_REQID_1	PASS	34.3
testcase/DdnsEdit/test_DDNSEDIT_REQID_3.py	test_DDNSEDIT_REQID_1	PASS	34.99
testcase/DdnsEdit/test_DDNSEDIT_REQID_4.py	test_DDNSEDIT_REQID_1	PASS	34.28
testcase/DdnsEdit/test_DDNSEDIT_REQID_5.py	test_DDNSEDIT_REQID_1	PASS	34.36
testcase/DdnsEdit/test_DDNSEDIT_REQID_6.py	test_DDNSEDIT_REQID_1	PASS	34.28
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_1.py	test_DDNSEDIT_USRPWD_1	PASS	40.32
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_2.py	test_DDNSEDIT_USRPWD_1	PASS	35.35
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_3.py	test_DDNSEDIT_USRPWD_1	PASS	34.3
testcase/DdnsEdit/test_DDNSEDIT_USRPWD_4.py	test_DDNSEDIT_USRPWD_1	PASS	34.3
testcase/DdnsEdit/test_DDNS_EDIT_ACT_1.py	test_ddnsCreate_RES_1	PASS	37.26
testcase/DdnsEdit/test_DDNS_EDIT_RES_1.py	test_ddnsCreate_RES_1	PASS	45.26
testcase/DdnsEdit/test_DDNS_EDIT_RES_2.py	test_ddnsCreate_RES_1	PASS	625.04
testcase/DdnsEdit/test_DDNS_EDIT_RES_3.py	test_ddnsCreate_RES_1	PASS	642.34
testcase/DdnsRemove/test_DDNSREMOVE_ACT_1.py	test_ddnsRemove_RES_1	PASS	37.17
testcase/DdnsRemove/test_DDNSREMOVE_ACT_2.py	test_ddnsRemove_RES_1	PASS	34.53
testcase/DdnsRemove/test_DDNSREMOVE_ACT_3.py	test_ddnsRemove_RES_1	PASS	34.46
testcase/DdnsRemove/test_DDNSREMOVE_ACT_4.py	test_ddnsRemove_RES_1	PASS	34.25
testcase/DdnsRemove/test_DDNSREMOVE_ACT_5.py	test_ddnsRemove_RES_1	PASS	34.28
testcase/DdnsRemove/test_DDNSREMOVE_ACT_6.py	test_ddnsRemove_RES_1	PASS	34.7
testcase/DdnsRemove/test_DDNSREMOVE_ACT_7.py	test_ddnsRemove_RES_1	PASS	38.62
testcase/DdnsRemove/test_DDNSREMOVE_ACT_8.py	test_ddnsRemove_RES_1	PASS	34.63
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_1.py	test_DDNSREMOVE_INDEX_1	FAIL	60.9	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_2.py	test_DDNSREMOVE_INDEX_1	PASS	34.36
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_3.py	test_DDNSREMOVE_INDEX_1	PASS	34.25
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_4.py	test_DDNSREMOVE_INDEX_1	PASS	34.28
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_5.py	test_DDNSREMOVE_INDEX_1	PASS	34.36
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_6.py	test_DDNSREMOVE_INDEX_1	PASS	34.24
testcase/DdnsRemove/test_DDNSREMOVE_INDEX_7.py	test_DDNSREMOVE_INDEX_1	FAIL	34.29	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"12>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Unknown Error>, but was not.
testcase/DdnsRemove/test_DDNSREMOVE_REQID_1.py	test_ddnsRemove_RES_1	FAIL	52.95	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not. 3. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 4. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not. 5. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 6. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not. 7. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 8. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsRemove/test_DDNSREMOVE_REQID_2.py	test_ddnsRemove_RES_1	PASS	34.94
testcase/DdnsRemove/test_DDNSREMOVE_REQID_3.py	test_ddnsRemove_RES_1	PASS	34.24
testcase/DdnsRemove/test_DDNSREMOVE_REQID_4.py	test_ddnsRemove_RES_1	PASS	34.33
testcase/DdnsRemove/test_DDNSREMOVE_REQID_5.py	test_ddnsRemove_RES_1	PASS	34.26
testcase/DdnsRemove/test_DDNSREMOVE_REQID_6.py	test_ddnsRemove_RES_1	PASS	34.29
testcase/DdnsRemove/test_DDNSREMOVE_RES_1.py	test_DDNSVIEW_RES_1	FAIL	42.29	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsRemove/test_DDNSREMOVE_RES_2.py	test_DDNSVIEW_RES_1	FAIL	622.29	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not.
testcase/DdnsRemove/test_DDNSREMOVE_RES_3.py	test_DDNSVIEW_RES_1	PASS	642.32
testcase/DdnsRemove/test_DDNS_REMOVE_RES_1.py	test_ddnsRemove_RES_1	FAIL	34.45	AssertionError: soft assertion failures (...) AssertionError: soft assertion failures: 1. [STATUS ERROR] Expected <"11> to be equal to <"0>, but was not. 2. [MESSAGE ERROR] Expected <"Verify Fail> to be equal to <"Success>, but was not. 3. [ACTION ERROR] Expected <"None> to be equal to <"ddnsRemove>, but was not.
testcase/DdnsView/test_DDNSVIEW_ACT_1.py	test_DDNSVIEW_ACT_1	PASS	34.28
testcase/DdnsView/test_DDNSVIEW_ACT_2.py	test_DDNSVIEW_ACT_2	PASS	34.45
testcase/DdnsView/test_DDNSVIEW_ACT_3.py	test_DDNSVIEW_ACT_3	PASS	35.38
testcase/DdnsView/test_DDNSVIEW_ACT_4.py	test_DDNSVIEW_ACT_4	PASS	34.29
testcase/DdnsView/test_DDNSVIEW_ACT_5.py	test_DDNSVIEW_ACT_5	PASS	34.26
testcase/DdnsView/test_DDNSVIEW_ACT_6.py	test_DDNSVIEW_ACT_6	PASS	36.84
testcase/DdnsView/test_DDNSVIEW_ACT_7.py	test_DDNSVIEW_ACT_7	PASS	38.47
testcase/DdnsView/test_DDNSVIEW_ACT_8.py	test_DDNSVIEW_ACT_8	PASS	34.67
testcase/DdnsView/test_DDNSVIEW_PROVIDER_1.py	test_DDNSVIEW_RESULT_1	FAIL	57.1	AttributeError: 'AdvDDNSPage' object has no (...) AttributeError: 'AdvDDNSPage' object has no attribute 'click_delete_ddns'
testcase/DdnsView/test_DDNSVIEW_REQID_1.py	test_DDNSVIEW_RESULT_1	PASS	53.54
testcase/DdnsView/test_DDNSVIEW_REQID_2.py	test_DDNSVIEW_REQID_2	PASS	34.24
testcase/DdnsView/test_DDNSVIEW_REQID_3.py	test_DDNSVIEW_REQID_3	PASS	34.27
testcase/DdnsView/test_DDNSVIEW_REQID_4.py	test_DDNSVIEW_REQID_4	PASS	34.27
testcase/DdnsView/test_DDNSVIEW_REQID_5.py	test_DDNSVIEW_REQID_5	PASS	34.28
testcase/DdnsView/test_DDNSVIEW_REQID_6.py	test_DDNSVIEW_REQID_6	PASS	34.45
testcase/DdnsView/test_DDNSVIEW_RES_1.py	test_DDNSVIEW_ACT_1	FAIL	34.33	AssertionError: soft assertion failures: (...) AssertionError: soft assertion failures: 1. Expected <"0> to be equal to <"1>, but was not.
testcase/DdnsView/test_DDNSVIEW_RES_2.py	test_DDNSVIEW_ACT_1	PASS	34.3
testcase/DdnsView/test_DDNSVIEW_RES_3.py	test_DDNSVIEW_ACT_1	FAIL	34.32	AssertionError: soft assertion failures: (...) AssertionError: soft assertion failures: 1. Expected <"2> to be equal to <"1>, but was not.
testcase/DdnsView/test_DDNSVIEW_RES_4.py	test_DDNSVIEW_ACT_1	FAIL	34.29	AssertionError: soft assertion failures: (...) AssertionError: soft assertion failures: 1. Expected <"3> to be equal to <"1>, but was not.
testcase/DdnsView/test_DDNSVIEW_RES_5.py	test_DDNSVIEW_ACT_1	FAIL	34.51	AssertionError: soft assertion failures: (...) AssertionError: soft assertion failures: 1. Expected <"4> to be equal to <"1>, but was not.
testcase/DdnsView/test_DDNS_VIEW_RES_1.py	test_portView_RES_1	PASS	34.41
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_1.py	test_DEV_INFO_VIEW_ACT_1	PASS	34.42
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_234.py	test_DEV_INFO_VIEW_ACT_1	FAIL	35.3	AttributeError: 'Test_DeviceInfoView' object ha (...) AttributeError: 'Test_DeviceInfoView' object has no attribute 'traceClt'
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_6.py	test_DEV_INFO_VIEW_ACT_1	FAIL	36.5	AttributeError: 'Test_DeviceInfoView' object ha (...) AttributeError: 'Test_DeviceInfoView' object has no attribute 'traceClt'
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_7.py	test_DEV_INFO_VIEW_ACT_1	FAIL	38.77	AttributeError: 'Test_DeviceInfoView' object ha (...) AttributeError: 'Test_DeviceInfoView' object has no attribute 'traceClt'
testcase/DeviceInfoView/test_DEV_INFO_VIEW_ACT_8.py	test_DEV_INFO_VIEW_ACT_1	FAIL	34.66	AttributeError: 'Test_DeviceInfoView' object ha (...) AttributeError: 'Test_DeviceInfoView' object has no attribute 'traceClt'
testcase/DeviceInfoView/test_DEV_INFO_VIEW_MISS_ATB_1.py	test_DEV_INFO_MISS_ATB_1	PASS	34.26
testcase/DeviceInfoView/test_DEV_INFO_VIEW_MISS_REQID_1.py	test_DEV_INFO_MISS_ATB_1	PASS	34.29
testcase/DeviceInfoView/test_DEV_INFO_VIEW_REQID_1.py	test_TRACE_ROUTE_RES_1	FAIL	35.54	AttributeError: 'Test_TraceRoute' object has no (...) AttributeError: 'Test_TraceRoute' object has no attribute 'traceClt'
testcase/DeviceInfoView/test_DEV_INFO_VIEW_REQID_2345.py	test_TRACE_ROUTE_RES_1	FAIL	34.94	AttributeError: 'Test_TraceRoute' object has no (...) AttributeError: 'Test_TraceRoute' object has no attribute 'traceClt'
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RESULT_1.py	test_DEV_INFO_VIEW_ACT_1	FAIL	42.39	AssertionError: [{'deviceLocation': ['requi (...) AssertionError: [{'deviceLocation': ['required field']}] Expected <"True>, but was not.
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RES_1.py	test_DEV_INFO_VIEW_ACT_1	PASS	42.43
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RES_2.py	test_DEV_INFO_VIEW_ACT_1	FAIL	622.45	AssertionError: [{'deviceLocation': ['requi (...) AssertionError: [{'deviceLocation': ['required field']}] Expected <"True>, but was not.
testcase/DeviceInfoView/test_DEV_INFO_VIEW_RES_3.py	test_DEV_INFO_VIEW_ACT_1	PASS	642.33
testcase/Discovery/test_DISCOVER_ACT_1.py	test_DISCOVER_ACT_1	FAIL	0.21	OSError: [WinError 10040] A message sent on a d (...) OSError: [WinError 10040] A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself
testcase/Discovery/test_DISCOVER_ACT_2.py	test_DISCOVER_ACT_1	PASS	6.04
testcase/Discovery/test_DISCOVER_ACT_345.py	test_DISCOVER_ACT_1	PASS	12.07
testcase/Discovery/test_DISCOVER_ACT_6.py	test_DISCOVER_ACT_1	PASS	42.16
testcase/Discovery/test_DISCOVER_ACT_7.py	test_DISCOVER_ACT_1	PASS	72.3
testcase/Discovery/test_DISCOVER_ACT_8.py	test_DISCOVER_ACT_1	PASS	6.05
testcase/Discovery/test_DISCOVER_AUTH_1.py	test_DISCOVER_ACT_1	FAIL	0.06	OSError: [WinError 10040] A message sent on a d (...) OSError: [WinError 10040] A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself
testcase/Discovery/test_DISCOVER_AUTH_10.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_AUTH_2.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_AUTH_3.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_AUTH_4.py	test_DISCOVER_AUTH_1	PASS	0.03
testcase/Discovery/test_DISCOVER_AUTH_5.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_AUTH_6.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_AUTH_7.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_AUTH_8.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_AUTH_9.py	test_DISCOVER_AUTH_1	PASS	0.02
testcase/Discovery/test_DISCOVER_MAC_1.py	test_DISCOVER_ACT_1	FAIL	0.06	OSError: [WinError 10040] A message sent on a d (...) OSError: [WinError 10040] A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself
testcase/Discovery/test_DISCOVER_MAC_2345.py	test_DISCOVER_ACT_1	PASS	14.11
testcase/Discovery/test_DISCOVER_MISS_ATB.py	test_DISCOVER_ACT_1	PASS	15.06
testcase/Discovery/test_DISCOVER_MISS_REQID.py	test_DISCOVER_ACT_1	PASS	5.03
testcase/Discovery/test_DISCOVER_REQID_1.py	test_DISCOVER_ACT_1	FAIL	0.07	OSError: [WinError 10040] A message sent on a d (...) OSError: [WinError 10040] A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself
testcase/Discovery/test_DISCOVER_REQID_2345.py	test_DISCOVER_ACT_1	PASS	10.08
testcase/Discovery/test_DISCOVER_RESULT_1.py	test_DISCOVER_ACT_1	SKIP	10.1	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Discovery\\test_DISCOVER_RESULT_1.py', 11, 'Skipped: This is Manual Testcase')
testcase/Discovery/test_DISCOVER_RESULT_2.py	test_DISCOVER_ACT_1	SKIP	10.11	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Discovery\\test_DISCOVER_RESULT_2.py', 11, 'Skipped: This is Manual Testcase')
testcase/Discovery/test_DISCOVER_RESULT_3.py	test_DISCOVER_ACT_1	SKIP	10.11	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Discovery\\test_DISCOVER_RESULT_3.py', 11, 'Skipped: This is Manual Testcase')
testcase/Discovery/test_DISCOVER_RESULT_4.py	test_DISCOVER_ACT_1	SKIP	10.12	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Discovery\\test_DISCOVER_RESULT_4.py', 11, 'Skipped: This is Manual Testcase')
testcase/Discovery/test_DISCOVER_RESULT_5.py	test_DISCOVER_ACT_1	SKIP	10.12	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Discovery\\test_DISCOVER_RESULT_5.py', 11, 'Skipped: This is Manual Testcase')
testcase/Discovery/test_DISCOVER_RESULT_6.py	test_DISCOVER_ACT_1	SKIP	10.13	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Discovery\\test_DISCOVER_RESULT_6.py', 11, 'Skipped: This is Manual Testcase')
testcase/Discovery/test_DISCOVER_RESULT_7.py	test_DISCOVER_ACT_1	SKIP	10.13	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Discovery\\test_DISCOVER_RESULT_7.py', 11, 'Skipped: This is Manual Testcase')
testcase/LanEdit/test_LANEDIT_IPADDR_1.py	test_LANEDIT_RES_1	SKIP	10.43	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\LanEdit\\test_LANEDIT_IPADDR_1.py', 16, 'Skipped: This is Manual Testcase')
testcase/LanEdit/test_LANEDIT_IPADDR_2345678.py	test_LANEDIT_RES_1	FAIL	6692.49	json.decoder.JSONDecodeError: Expecting val (...) json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
testcase/LanEdit/test_LANEDIT_RES_1.py	test_LANEDIT_RES_1	SKIP	6692.5	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\LanEdit\\test_LANEDIT_RES_1.py', 16, 'Skipped: This is Manual Testcase')
testcase/LanEdit/test_LANEDIT_SUBNET_1.py	test_LANEDIT_RES_1	SKIP	6692.5	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\LanEdit\\test_LANEDIT_SUBNET_1.py', 16, 'Skipped: This is Manual Testcase')
testcase/LanEdit/test_LANEDIT_SUBNET_23.py	test_LANEDIT_RES_1	ERROR	59.63	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Login/CAP/test_LOGIN_AUTH_1.py	test_LOGIN_SES_1	ERROR	21.23	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098189.563068 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285C8DA60> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_10.py	test_LOGIN_AUTH_10	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098210.789702 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285ED8CA0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_11.py	test_LOGIN_AUTH_11	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098231.8782983 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285C8D280> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_12.py	test_LOGIN_AUTH_12	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098252.9748783 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285ED8C10> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_2.py	test_LOGIN_AUTH_2	ERROR	21.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098274.0932312 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285CBE4C0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_3.py	test_LOGIN_AUTH_3	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098295.2241018 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285C8DC10> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_4.py	test_LOGIN_AUTH_4	ERROR	21.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098316.348532 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285D2BF70> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_5.py	test_LOGIN_AUTH_5	ERROR	21.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098337.4324481 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E285ED8040> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_6.py	test_LOGIN_AUTH_6	ERROR	21.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098358.59131 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286000E50> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_7.py	test_LOGIN_AUTH_7	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098379.720308 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286000EE0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_8.py	test_LOGIN_AUTH_8	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098400.836507 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286000430> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_AUTH_9.py	test_LOGIN_AUTH_9	ERROR	21.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098421.9562998 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286092B80> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_COOKIE_1.py	test_LOGIN_COOKIE_1	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098443.044286 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28609C8B0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_COOKIE_2.py	test_LOGIN_COOKIE_2	ERROR	21.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098464.1393905 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28609C790> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_COOKIE_3.py	test_LOGIN_COOKIE_4	ERROR	21.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098485.2716255 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28609C5E0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_COOKIE_4.py	test_LOGIN_COOKIE_3	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098506.4337978 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286078AF0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_COOKIE_5.py	test_LOGIN_COOKIE_3	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098527.5409644 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286078A60> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_HSIS_1.py	test_LOGIN_SES_1	SKIP	21.11	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Login\\CAP\\test_LOGIN_HSIS_1.py', 27, 'Skipped: This is Manual Testcase')
testcase/Login/CAP/test_LOGIN_HSIS_2.py	test_LOGIN_SES_1	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098548.6529307 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286078B80> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_1.py	test_LOGIN_MD5_1	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098569.7550664 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2860785E0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_2.py	test_LOGIN_MD5_2	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098590.844336 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286078790> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_3.py	test_LOGIN_MD5_3	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098611.941539 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2860780D0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_4.py	test_LOGIN_MD5_4	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098633.039592 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2860B21F0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_5.py	test_LOGIN_MD5_5	ERROR	21.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098654.165183 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2860B20D0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_6.py	test_LOGIN_MD5_6	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098675.3098826 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2860B2B80> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_7.py	test_LOGIN_MD5_7	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098696.4163918 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286075F70> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_MD5_8.py	test_LOGIN_MD5_8	SKIP	21.12	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Login\\CAP\\test_LOGIN_MD5_8.py', 27, 'Skipped: This is Manual Testcase')
testcase/Login/CAP/test_LOGIN_MD5_9.py	test_LOGIN_MD5_9	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098717.5417366 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286075AF0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_RES_1.py	test_LOGIN_SES_1	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098738.6416342 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28616CE50> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_RES_2.py	test_LOGIN_SES_1	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098759.750805 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28616CAF0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_RES_3.py	test_LOGIN_SES_1	ERROR	21.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098780.863935 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28616C940> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_SES_1.py	test_LOGIN_SES_1	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098801.9995725 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28616C040> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_SES_2.py	test_LOGIN_SES_2	ERROR	21.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098823.100238 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2861D7D30> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_SES_3.py	test_LOGIN_SES_3	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098844.2633944 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2861D7AF0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_SES_4.py	test_LOGIN_SES_4	SKIP	21.1	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Login\\CAP\\test_LOGIN_SES_4.py', 27, 'Skipped: This is Manual Testcase')
testcase/Login/CAP/test_LOGIN_SES_5.py	test_LOGIN_SES_5	SKIP	21.11	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Login\\CAP\\test_LOGIN_SES_5.py', 27, 'Skipped: This is Manual Testcase')
testcase/Login/CAP/test_LOGIN_SES_6.py	test_LOGIN_SES_2	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098865.3760366 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286147F70> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_SES_7.py	test_LOGIN_SES_2	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098886.4796298 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2861471F0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_SES_8.py	test_LOGIN_SES_2	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098907.6005306 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286147CA0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_1.py	test_LOGIN_STATUS_1	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098928.7139254 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286103160> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_10.py	test_LOGIN_STATUS_10	ERROR	21.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098949.8089378 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286103EE0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_11.py	test_LOGIN_STATUS_11	ERROR	21.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098970.8958669 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2861D8C10> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_12.py	test_LOGIN_STATUS_12	ERROR	21.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668098991.9751785 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2861D8EE0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_13.py	test_LOGIN_STATUS_11	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099013.1192565 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2861D88B0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_14.py	test_LOGIN_STATUS_12	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099034.2400324 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28620EB80> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_2.py	test_LOGIN_STATUS_2	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099055.3384345 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28620EAF0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_3.py	test_LOGIN_STATUS_3	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099076.4577785 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28620E820> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_4.py	test_LOGIN_STATUS_4	ERROR	21.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099097.563126 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286289AF0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_5.py	test_LOGIN_STATUS_5	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099118.7202506 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286289A60> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_6.py	test_LOGIN_STATUS_6	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099139.8499074 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286289790> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_7.py	test_LOGIN_STATUS_7	ERROR	21.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099160.9494412 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28620E0D0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_8.py	test_LOGIN_STATUS_8	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099182.108233 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286239700> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Login/CAP/test_LOGIN_STATUS_9.py	test_LOGIN_STATUS_9	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099203.2012978 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E286239CA0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Logout/test_LOGOUT_ACT_1.py	test_LOGOUT_ACT_1	ERROR	52.88	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_ACT_2.py	test_LOGOUT_ACT_2	ERROR	52.9	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_ACT_3.py	test_LOGOUT_ACT_2	ERROR	52.86	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_ACT_4.py	test_LOGOUT_ACT_2	ERROR	55.57	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_ACT_5.py	test_LOGOUT_ACT_2	ERROR	48.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_ACT_6.py	test_LOGOUT_ACT_2	ERROR	55.83	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_ACT_7.py	test_LOGOUT_ACT_2	ERROR	59.02	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_ACT_8.py	test_LOGOUT_ACT_2	ERROR	52.93	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_MISS_ATTB.py	test_LOGOUT_ACT_2	ERROR	62.34	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_MISS_REQID.py	test_LOGOUT_ACT_2	ERROR	52.84	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_REQID_1.py	test_LOGOUT_REQID_1	ERROR	21.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099769.9056506 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2862F2430> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Logout/test_LOGOUT_REQID_2.py	test_LOGOUT_REQID_2	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099791.0072954 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2862F2310> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Logout/test_LOGOUT_REQID_3.py	test_LOGOUT_REQID_2	ERROR	21.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099812.114408 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2862F2D30> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Logout/test_LOGOUT_REQID_4.py	test_LOGOUT_REQID_2	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099833.2348483 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2862F2AF0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Logout/test_LOGOUT_REQID_5.py	test_LOGOUT_REQID_2	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099854.3473353 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E2862F2670> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Logout/test_LOGOUT_REQID_6.py	test_LOGOUT_REQID_2	ERROR	21.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668099875.439353 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E28733E4C0> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/Logout/test_LOGOUT_RES_1.py	test_LOGOUT_RES_1	ERROR	46.2	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_RES_2.py	test_LOGOUT_RES_2	ERROR	53.29	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_RES_3.py	test_LOGOUT_RES_3	ERROR	56.49	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_SES_1.py	test_LOGOUT_SES_1	ERROR	59.24	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") serialClt = Serial_Lib() meshCreateClt = meshCreateClient() ClientSes = openssesionClient() LoginClt = LoginClient() cookie = "" passGuiDefault = utl.md5_encrypt(cfg.STR_ENCRYPT, "00000006") modeMesh = serialClt.Get_Mode_Mesh() SSIDName = serialClt.Get_SSID_Name(cfg.WIFI_INT_5G) passGUI = serialClt.Get_Pass_GUI() if modeMesh == "FACTORY": cookie = ClientSes.Open_Sesion_And_Get_Cookie() LoginClt.login(cookie) meshCreateClt.Create_Mesh_Network_Default(cookie) elif (modeMesh != "FACTORY") and ((SSIDName == cfg.SSID) and (passGUI == passGuiDefault)): > cookie = ClientSes.Open_Sesion_And_Get_Cookie() testcase\conftest.py:98: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ APIObject\openssesion.py:127: in Open_Sesion_And_Get_Cookie sesID, salt, reqID = self.Open_Session_And_Get_Session_ID() APIObject\openssesion.py:82: in Open_Session_And_Get_Session_ID response = self.request.post(url=self.url, headers=self.headersCurl, pload=payload) base\APILib.py:56: in post resBody = json.loads(resBody) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\__init__.py:346: in loads return _default_decoder.decode(s) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:337: in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , s = '', idx = 0 def raw_decode(self, s, idx=0): """Decode a JSON document from ``s`` (a ``str`` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in ``s`` where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. """ try: obj, end = self.scan_once(s, idx) except StopIteration as err: > raise JSONDecodeError("Expecting value", s, err.value) from None E json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\json\decoder.py:355: JSONDecodeError
testcase/Logout/test_LOGOUT_SES_2.py	test_LOGOUT_SES_2	ERROR	21.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) > SSHShell = client.create_shell() testcase\conftest.py:52: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , args = (), kwargs = {} message = '\n==========================================\nCALL\n------------------------------------------\ncreate_shell args..........: ()\ncreate_shell kwargs........: {}\n------------------------------------------\n' start = 1668100111.7673357 @functools.wraps(func) def wrapper(self, args, kwargs): message = ( u"\n{equals}\nCALL\n{dash}\n" u"{name} args..........: {args}\n" u"{name} kwargs........: {kwargs}\n" u"{dash}\n").format( dash="-" DASH_WIDTH, equals="=" * DASH_WIDTH, name=func.__name__, args=args, kwargs=kwargs) self._log.info(message) start = time.time() try: > resp = func(self, args, kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\common.py:42: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , keepalive = None, connect_kwargs = {} @common.SSHLogger def create_shell(self, keepalive=None, connect_kwargs): > connection = self._connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:183: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = None, port = None, username = None, password = None, accept_missing_host_key = None, timeout = None, compress = None, pkey = None, look_for_keys = None allow_agent = None, key_filename = None, proxy_type = None, proxy_ip = None, proxy_port = None, sock = None def _connect( self, hostname=None, port=None, username=None, password=None, accept_missing_host_key=None, timeout=None, compress=None, pkey=None, look_for_keys=None, allow_agent=None, key_filename=None, proxy_type=None, proxy_ip=None, proxy_port=None, sock=None): connect_kwargs = dict(self.connect_kwargs) connect_kwargs.update({ k: locals().get(k) for k in self.connect_kwargs if locals().get(k) is not None}) connect_kwargs["port"] = int(connect_kwargs.get("port")) ssh = ExtendedParamikoSSHClient() if bool(self.accept_missing_host_key or accept_missing_host_key): ssh.set_missing_host_key_policy(AutoAddPolicy()) if connect_kwargs.get("pkey") is not None: connect_kwargs["pkey"] = RSAKey.from_private_key( six.BytesIO(six.u(connect_kwargs["pkey"]))) proxy_type = proxy_type or self.proxy_type proxy_ip = proxy_ip or self.proxy_ip proxy_port = proxy_port or self.proxy_port if connect_kwargs.get("sock") is not None: pass elif all([proxy_type, proxy_ip, proxy_port]): connect_kwargs["sock"] = create_connection( (connect_kwargs.get("hostname"), connect_kwargs.get("port")), proxy_type, proxy_ip, int(proxy_port)) > ssh.connect(connect_kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\sshaolin\client.py:164: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = , hostname = '192.168.88.1', port = 22, username = 'root', password = 'VNPT@88Tech', pkey = None, key_filename = None, timeout = 300, allow_agent = False look_for_keys = False, compress = True, sock = , gss_auth = False, gss_kex = False, gss_deleg_creds = True gss_host = None, banner_timeout = None, auth_timeout = None, gss_trust_dns = True, passphrase = None, disabled_algorithms = None def connect( self, hostname, port=SSH_PORT, username=None, password=None, pkey=None, key_filename=None, timeout=None, allow_agent=True, look_for_keys=True, compress=False, sock=None, gss_auth=False, gss_kex=False, gss_deleg_creds=True, gss_host=None, banner_timeout=None, auth_timeout=None, gss_trust_dns=True, passphrase=None, disabled_algorithms=None, ): """ Connect to an SSH server and authenticate to it. The server's host key is checked against the system host keys (see `load_system_host_keys`) and any local host keys (`load_host_keys`). If the server's hostname is not found in either set of host keys, the missing host key policy is used (see `set_missing_host_key_policy`). The default policy is to reject the key and raise an `.SSHException`. Authentication is attempted in the following order of priority: - The ``pkey`` or ``key_filename`` passed in (if any) - ``key_filename`` may contain OpenSSH public certificate paths as well as regular private-key paths; when files ending in ``-cert.pub`` are found, they are assumed to match a private key, and both components will be loaded. (The private key itself does not* need to be listed in ``key_filename`` for this to occur - just the certificate.) - Any key we can find through an SSH agent - Any "id_rsa", "id_dsa" or "id_ecdsa" key discoverable in ``~/.ssh/`` - When OpenSSH-style public certificates exist that match an existing such private key (so e.g. one has ``id_rsa`` and ``id_rsa-cert.pub``) the certificate will be loaded alongside the private key and used for authentication. - Plain username/password auth, if a password was given If a private key requires a password to unlock it, and a password is passed in, that password will be used to attempt to unlock the key. :param str hostname: the server to connect to :param int port: the server port to connect to :param str username: the username to authenticate as (defaults to the current local username) :param str password: Used for password authentication; is also used for private key decryption if ``passphrase`` is not given. :param str passphrase: Used for decrypting private keys. :param .PKey pkey: an optional private key to use for authentication :param str key_filename: the filename, or list of filenames, of optional private key(s) and/or certs to try for authentication :param float timeout: an optional timeout (in seconds) for the TCP connect :param bool allow_agent: set to False to disable connecting to the SSH agent :param bool look_for_keys: set to False to disable searching for discoverable private key files in ``~/.ssh/`` :param bool compress: set to True to turn on compression :param socket sock: an open socket or socket-like object (such as a `.Channel`) to use for communication to the target host :param bool gss_auth: ``True`` if you want to use GSS-API authentication :param bool gss_kex: Perform GSS-API Key Exchange and user authentication :param bool gss_deleg_creds: Delegate GSS-API client credentials or not :param str gss_host: The targets name in the kerberos database. default: hostname :param bool gss_trust_dns: Indicates whether or not the DNS is trusted to securely canonicalize the name of the host being connected to (default ``True``). :param float banner_timeout: an optional timeout (in seconds) to wait for the SSH banner to be presented. :param float auth_timeout: an optional timeout (in seconds) to wait for an authentication response. :param dict disabled_algorithms: an optional dict passed directly to `.Transport` and its keyword argument of the same name. :raises: `.BadHostKeyException` -- if the server's host key could not be verified :raises: `.AuthenticationException` -- if authentication failed :raises: `.SSHException` -- if there was any other error connecting or establishing an SSH session :raises socket.error: if a socket error occurred while connecting .. versionchanged:: 1.15 Added the ``banner_timeout``, ``gss_auth``, ``gss_kex``, ``gss_deleg_creds`` and ``gss_host`` arguments. .. versionchanged:: 2.3 Added the ``gss_trust_dns`` argument. .. versionchanged:: 2.4 Added the ``passphrase`` argument. .. versionchanged:: 2.6 Added the ``disabled_algorithms`` argument. """ if not sock: errors = {} # Try multiple possible address families (e.g. IPv4 vs IPv6) to_try = list(self._families_and_addresses(hostname, port)) for af, addr in to_try: try: sock = socket.socket(af, socket.SOCK_STREAM) if timeout is not None: try: sock.settimeout(timeout) except: pass > retry_on_signal(lambda: sock.connect(addr)) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ function = . at 0x000001E287385430> def retry_on_signal(function): """Retries function until it doesn't raise an EINTR error""" while True: try: > return function() C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\util.py:283: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > retry_on_signal(lambda: sock.connect(addr)) E TimeoutError: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\paramiko\client.py:349: TimeoutError During handling of the above exception, another exception occurred: request = > @pytest.fixture(autouse=False, scope="class") def create_shell(request): try: client = SSHClient(hostname=cfg.IP_ADDR_CAP, username=cfg.USER_SSH, password=cfg.PASS_SSH, timeout=300) SSHShell = client.create_shell() request.cls.SSHShell = SSHShell except: > raise Exception("Exception during connecting to " + cfg.IP_ADDR_CAP + "!\n") E Exception: Exception during connecting to 192.168.88.1! testcase\conftest.py:55: Exception
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_BRIGDE_TO_BRIGDE.py	test_MESH_CREATE_RES_1	SKIP	21.43	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_BRIGDE_TO_BRIGDE.py', 61, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_BRIGDE_TO_REPEATER.py	test_MESH_CREATE_RES_1	SKIP	21.43	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_BRIGDE_TO_REPEATER.py', 61, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_BRIGDE_TO_ROUTER.py	test_MESH_CREATE_RES_1	SKIP	21.44	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_BRIGDE_TO_ROUTER.py', 60, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_REPEATER_TO_BRIGDE.py	test_MESH_CREATE_RES_1	SKIP	21.44	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_REPEATER_TO_BRIGDE.py', 62, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_REPEATER_TO_REPEATER.py	test_MESH_CREATE_RES_1	SKIP	21.45	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_REPEATER_TO_REPEATER.py', 64, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_REPEATER_TO_ROUTER.py	test_MESH_CREATE_RES_1	SKIP	21.45	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_REPEATER_TO_ROUTER.py', 64, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_ROUTER_TO_BRIGDE.py	test_MESH_CREATE_RES_1	SKIP	21.46	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_ROUTER_TO_BRIGDE.py', 59, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_ROUTER_TO_REPEATER.py	test_MESH_CREATE_RES_1	SKIP	21.46	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_ROUTER_TO_REPEATER.py', 59, 'Skipped: This is Manual Testcase')
testcase/MeshChange/test_MESH_CHANGE_RESULT_1_ROUTER_TO_ROUTER.py	test_MESH_CREATE_RES_1	SKIP	21.47	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshChange\\test_MESH_CHANGE_RESULT_1_ROUTER_TO_ROUTER.py', 59, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_MAIN_SSIDNAME_AND_PASS_1.py	test_MESH_CREATE_RES_1	SKIP	21.49	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_MAIN_SSIDNAME_AND_PASS_1.py', 69, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_REPEATER_SSIDNAME_AND_PASS_1.py	test_MESH_CREATE_RES_1	SKIP	21.5	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_REPEATER_SSIDNAME_AND_PASS_1.py', 65, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_RESULT_1_ROUTER.py	test_MESH_CREATE_RES_1	SKIP	21.5	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_RESULT_1_ROUTER.py', 39, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_RESULT_2_BRIDGE_MODE.py	test_MESH_CREATE_RES_1	SKIP	21.51	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_RESULT_2_BRIDGE_MODE.py', 44, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_RESULT_3_REPEATER_2G_OPEN.py	test_MESH_CREATE_RES_1	SKIP	21.51	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_RESULT_3_REPEATER_2G_OPEN.py', 45, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_RESULT_4_REPEATER_5G_OPEN.py	test_MESH_CREATE_RES_1	SKIP	21.52	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_RESULT_4_REPEATER_5G_OPEN.py', 44, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_RESULT_5_REPEATER_2G_PASS.py	test_MESH_CREATE_RES_1	SKIP	21.52	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_RESULT_5_REPEATER_2G_PASS.py', 44, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_RESULT_6_REPEATER_5G_PASS.py	test_MESH_CREATE_RES_1	FAIL	1057.84	AssertionError: soft assertion failures: (...) AssertionError: soft assertion failures: 1. Expected <"WPA-PSK/WPA2-PSK Mixed Mode> to be equal to <"WPA-PSK>, but was not. assert False
testcase/MeshCreate/test_MESH_CREATE_RESULT_7_REPEATER_2G_PASS.py	test_MESH_CREATE_RES_1	SKIP	1057.85	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_RESULT_7_REPEATER_2G_PASS.py', 44, 'Skipped: This is Manual Testcase')
testcase/MeshCreate/test_MESH_CREATE_RESULT_8_REPEATER_5G_PASS.py	test_MESH_CREATE_RES_1	SKIP	1057.85	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshCreate\\test_MESH_CREATE_RESULT_8_REPEATER_5G_PASS.py', 44, 'Skipped: This is Manual Testcase')
testcase/MeshView/test_MESH_VIEW_RESULT_1_FAC.py	test_MESH_CREATE_RES_1	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login_without_create_mesh(request): > serialClt = Serial_Lib() testcase\conftest.py:112: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/MeshView/test_MESH_VIEW_RESULT_1_ROUTER.py	test_MESH_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login_without_create_mesh(request): > serialClt = Serial_Lib() testcase\conftest.py:112: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/MeshView/test_MESH_VIEW_RESULT_2_BRIDGE_MODE.py	test_MESH_CREATE_RES_1	SKIP	0.05	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\MeshView\\test_MESH_VIEW_RESULT_2_BRIDGE_MODE.py', 44, 'Skipped: This is Manual Testcase')
testcase/MeshView/test_MESH_VIEW_RESULT_3_REPEATER_2G_OPEN.py	test_MESH_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login_without_create_mesh(request): > serialClt = Serial_Lib() testcase\conftest.py:112: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NETINFO_VIEW_REQID_1.py	test_NETINFO_VIEW_REQID_1	ERROR	0.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NETINFO_VIEW_REQID_2.py	test_NETINFO_VIEW_REQID_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NETINFO_VIEW_REQID_23456.py	test_NETINFO_VIEW_REQID_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NETINFO_VIEW_RESULT_1.py	test_DEV_INFO_VIEW_ACT_1	SKIP	0.05	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\NetworkInfoView\\test_NETINFO_VIEW_RESULT_1.py', 14, 'Skipped: This is Manual Testcase')
testcase/NetworkInfoView/test_NETINFO_VIEW_RESULT_2.py	test_DEV_INFO_VIEW_ACT_1	SKIP	0.06	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\NetworkInfoView\\test_NETINFO_VIEW_RESULT_2.py', 14, 'Skipped: This is Manual Testcase')
testcase/NetworkInfoView/test_NETINFO_VIEW_RES_1.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NETINFO_VIEW_RES_2.py	test_NETINFO_VIEW_RES_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NETINFO_VIEW_RES_3.py	test_NETINFO_VIEW_RES_3	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_1.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_2.py	test_DEV_INFO_VIEW_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_3.py	test_DEV_INFO_VIEW_ACT_3	ERROR	0.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_4.py	test_DEV_INFO_VIEW_ACT_4	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_5.py	test_DEV_INFO_VIEW_ACT_5	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_6.py	test_DEV_INFO_VIEW_ACT_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_ACT_7.py	test_DEV_INFO_VIEW_ACT_7	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_MISS_ATTB.py	test_DEV_INFO_VIEW_ACT_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/NetworkInfoView/test_NET_INFO_VIEW_MISS_REQID.py	test_DEV_INFO_VIEW_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/OpenSession/test_OPEN_ACT_1.py	test_Openssesion_Success_first	PASS	3.39
testcase/OpenSession/test_OPEN_ACT_2.py	test_OPEN_ACT_2	PASS	3.46
testcase/OpenSession/test_OPEN_ACT_3.py	test_OPEN_ACT_3	PASS	3.67
testcase/OpenSession/test_OPEN_ACT_4.py	test_OPEN_ACT_4	PASS	3.3
testcase/OpenSession/test_OPEN_ACT_5.py	test_OPEN_ACT_5	PASS	3.3
testcase/OpenSession/test_OPEN_ACT_6.py	test_OPEN_ACT_6	PASS	5.13
testcase/OpenSession/test_OPEN_ACT_7.py	test_OPEN_ACT_7	PASS	6.78
testcase/OpenSession/test_OPEN_ACT_8.py	test_OPEN_ACT_8	PASS	3.54
testcase/OpenSession/test_OPEN_AUTH_1.py	test_OPEN_AUTH_1	PASS	3.31
testcase/OpenSession/test_OPEN_AUTH_10.py	test_OPEN_AUTH_10	PASS	3.2
testcase/OpenSession/test_OPEN_AUTH_2.py	test_OPEN_AUTH_2	PASS	3.29
testcase/OpenSession/test_OPEN_AUTH_3.py	test_OPEN_AUTH_3	PASS	3.36
testcase/OpenSession/test_OPEN_AUTH_4.py	test_OPEN_AUTH_4	PASS	3.33
testcase/OpenSession/test_OPEN_AUTH_5.py	test_OPEN_AUTH_5	PASS	3.42
testcase/OpenSession/test_OPEN_AUTH_6.py	test_OPEN_AUTH_6	PASS	3.46
testcase/OpenSession/test_OPEN_AUTH_7.py	test_OPEN_AUTH_7	PASS	3.31
testcase/OpenSession/test_OPEN_AUTH_8.py	test_OPEN_AUTH_8	PASS	3.22
testcase/OpenSession/test_OPEN_AUTH_9.py	test_OPEN_AUTH_9	PASS	3.32
testcase/OpenSession/test_OPEN_MAC_1.py	test_MAC_1	PASS	3.32
testcase/OpenSession/test_OPEN_MAC_2.py	test_OPEN_MAC_2	PASS	3.56
testcase/OpenSession/test_OPEN_MAC_3.py	test_OPEN_MAC_3	PASS	3.44
testcase/OpenSession/test_OPEN_MAC_4.py	test_OPEN_MAC_4	PASS	3.32
testcase/OpenSession/test_OPEN_MAC_5.py	test_OPEN_MAC_5	PASS	3.29
testcase/OpenSession/test_OPEN_MAC_6.py	test_OPEN_MAC_6	PASS	3.24
testcase/OpenSession/test_OPEN_MAC_7.py	test_OPEN_MAC_7	PASS	3.4
testcase/OpenSession/test_OPEN_MESH_ONLY_12.py	test_OPEN_MESH_ONLY	SKIP	3.4	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\OpenSession\\test_OPEN_MESH_ONLY_12.py', 20, 'Skipped: This is Manual Testcase')
testcase/OpenSession/test_OPEN_MISS_ATTB.py	test_OPEN_ACT_2	PASS	3.63
testcase/OpenSession/test_OPEN_MISS_REQID.py	test_OPEN_ACT_2	FAIL	3.35	KeyError: 'requestId'
testcase/OpenSession/test_OPEN_Mesh_ONT_123.py	test_OPEN_MESH_ONT	SKIP	3.35	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\OpenSession\\test_OPEN_Mesh_ONT_123.py', 19, 'Skipped: This is Manual Testcase')
testcase/OpenSession/test_OPEN_REQID_1.py	test_OPEN_REQID_1	PASS	3.8
testcase/OpenSession/test_OPEN_REQID_2.py	test_OPEN_REQID_2	PASS	5.7
testcase/OpenSession/test_OPEN_REQID_3.py	test_OPEN_REQID_3	PASS	3.24
testcase/OpenSession/test_OPEN_REQID_4.py	test_OPEN_REQID_4	PASS	3.24
testcase/OpenSession/test_OPEN_REQID_5.py	test_OPEN_REQID_5	PASS	3.28
testcase/OpenSession/test_OPEN_REQID_6.py	test_OPEN_REQID_5	PASS	3.3
testcase/OpenSession/test_OPEN_TIME_1.py	test_OPEN_TIME_1	PASS	3.26
testcase/OpenSession/test_OPEN_TIME_2.py	test_OPEN_TIME_2	PASS	608.47
testcase/OpenSession/test_OPEN_TIME_3.py	test_OPEN_TIME_3	PASS	8.49
testcase/OpenSession/test_OPEN_TIME_4.py	test_OPEN_TIME_4	PASS	598.52
testcase/OpenSession/test_OPEN_TIME_5.py	test_OPEN_TIME_5	PASS	608.65
testcase/OpenSession/test_OPEN_TIME_6.py	test_OPEN_TIME_6	PASS	638.81
testcase/PasswordEdit/test_PASSEDIT_ACT_1.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_ACT_2.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_ACT_3.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_ACT_4.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_ACT_5.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_ACT_678.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_MISS_ATTB.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_MISS_REQID.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_REQID_1.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_REQID_23456.py	test_PASSEDIT_REQID_23456	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_RES_1.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_RES_2.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_RES_3.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_RULE_101112.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_RULE_123456789.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_RULE_131415.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PasswordEdit/test_PASSEDIT_RULE_161718192021.py	test_DEV_INFO_VIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_1.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_2.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_3.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_4.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_5.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_6.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_7.py	test_PING_RES_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_ACT_8.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_CODE_1.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_CODE_2.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_CODE_3.py	test_PING_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_CODE_4.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_CODE_5.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_1.py	test_PING_RES_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_2.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_3.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_4.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_5.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_6.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_7.py	test_PING_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_8.py	test_PING_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_HOST_9.py	test_PING_RES_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_MISS_ATTB.py	test_PING_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_MISS_REQID.py	test_PING_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_REQID_1.py	test_PING_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_REQID_2.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_REQID_3.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_REQID_4.py	test_PING_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_REQID_5.py	test_PING_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_REQID_6.py	test_PING_RES_1	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_RES_1.py	test_PING_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_RES_2.py	test_PING_RES_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_RES_3.py	test_PING_RES_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_RES_RESULT_1.py	test_PING_RES_RESULT_1	ERROR	0.09	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_RES_RESULT_2.py	test_PING_RES_RESULT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ping/test_PING_RES_RESULT_3.py	test_PING_RES_RESULT_3	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_ACT_1.py	test_portCreate_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_ACT_2345.py	test_portCreate_RES_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_ACT_678.py	test_portCreate_ACT_678	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_INDEX_1.py	test_portCreate_index_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_INDEX_23456.py	test_portCreate_index_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_IPADDR_1.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_IPADDR_23.py	test_portCreate_index_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_MISS_ATTB.py	test_portCreate_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_MISS_REQID.py	test_portCreate_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_PROTOCOL_1.py	test_portCreate_index_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_PROTOCOL_2345.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_REQID_1.py	test_portCreate_REQID_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_REQID_23456.py	test_portCreate_REQID_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_RES_1.py	test_portCreate_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_RES_2.py	test_portCreate_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_RES_3.py	test_portCreate_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_SERVICENAME_1.py	test_portCreate_index_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_SERVICENAME_23456.py	test_portCreate_index_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_SERVICENAME_7.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_STARTLOPORT_1.py	test_portCreate_index_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_STARTLOPORT_23456.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_STARTREPORT_1.py	test_portCreate_index_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_STARTREPORT_23456.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_WANINDEX_1.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_WANINDEX_23456.py	test_portCreate_index_1	ERROR	0.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardCreate/test_PORT_CREATE_schema.py	test_portCreate_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_ACT_1.py	test_portedit_act_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_ACT_2345.py	test_portCreate_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_ACT_678.py	test_portCreate_ACT_678	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_INDEX_1.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_INDEX_23456.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_INDEX_7.py	test_portCreate_index_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_IPADDR_1.py	test_portCreate_index_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_IPADDR_23.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_MISS_ATTB.py	test_portCreate_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_MISS_REQID.py	test_portCreate_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_PROTOCOL_1.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_PROTOCOL_2345.py	test_portCreate_index_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_REQID_1.py	test_portCreate_REQID_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_REQID_23456.py	test_portCreate_REQID_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_RES_1.py	test_portEdit_RES_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_RES_2.py	test_portCreate_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_RES_3.py	test_portCreate_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_SERVICENAME.py	test_portCreate_index_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_STARTLOCALPORT_1.py	test_portCreate_index_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_STARTLOCALPORT_23456.py	test_portCreate_index_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_STARTREPORT_1.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_STARTREPORT_23456.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_WANINDEX_1.py	test_portCreate_index_1	ERROR	0.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_WANINDEX_23456.py	test_portCreate_index_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_WANINDEX_7.py	test_portCreate_index_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardEdit/test_PORT_EDIT_schema.py	test_portCreate_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_ACT_1.py	test_portRemove_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_ACT_2345.py	test_portRemove_ACT_2345	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_ACT_678.py	test_portRemove_ACT_678	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_INDEX_1.py	test_portRemove_INDEX_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_INDEX_23456.py	test_portRemove_INDEX_23456	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_INDEX_7.py	test_portRemove_INDEX_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_MISS_ATTB.py	test_portRemove_MISS_ATTB	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_MISS_REQID.py	test_portRemove_MISS_ATTB	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_REQID_1.py	test_portRemove_REQID_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_REQID_23456.py	test_portRemove_REQID_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_RES_1.py	test_portRemove_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_RES_2.py	test_portRemove_RES_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_RES_3.py	test_portRemove_RES_3	ERROR	0.11	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardRemove/test_PORT_REMOVE_SCHEMA.py	test_portRemove_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_ACT_1.py	test_portView_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_ACT_2345.py	test_portView_ACT_2345	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_ACT_678.py	test_portView_ACT_678	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_MISS_ATTB.py	test_portView_miss_ATTB	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_MISS_REQID.py	test_portView_miss_ATTB	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_REQID_1.py	test_portView_ACT_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_REQID_23456.py	test_portView_ACT_23456	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_RES_1.py	test_portView_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_RES_2.py	test_portView_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_RES_3.py	test_portView_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/PortforwardView/test_PFVIEW_Schema.py	test_portView_Schema	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_ACT_23458.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_ACT_6.py	test_RADIO24G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_ACT_7.py	test_RADIO24G_EDIT_RES_6	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_G_INVALID_2040MHz.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_G_INVALID_40MHz.py	test_RADIO24G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_G_VALID.py	test_RADIO24G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_NG_INVALID.py	test_RADIO24G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_1_STAND_NG_VALID.py	test_RADIO24G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_3456.py	test_RADIO2G_EDIT_BANDWIDTH_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_7.py	test_RADIO2G_EDIT_BANDWIDTH_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_8.py	test_RADIO2G_EDIT_BANDWIDTH_1	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BAND_WITH_9.py	test_RADIO2G_EDIT_BANDWIDTH_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BOTH_1_STAND_G.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_BOTH_1_STAND_NG.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_1.py	test_RADIO24G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_23.py	test_RADIO2G_EDIT_CHANNEL_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_4.py	test_RADIO2G_EDIT_CHANNEL_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_5.py	test_RADIO2G_EDIT_CHANNEL_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_CHANNEL_6.py	test_RADIO2G_EDIT_CHANNEL_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_MISS_ATTB.py	test_RADIO24G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_MISS_ATTB_CHANNEL_OR_BW.py	test_RADIO24G_EDIT_RES_6	ERROR	0.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_MISS_REQID.py	test_RADIO24G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_REQID_1.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_REQID_2345.py	test_RADIO24G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_RES_1.py	test_RADIO24G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_RES_2.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio2GEdit/test_RADIO24G_EDIT_RES_3.py	test_RADIO24G_EDIT_RES_6	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_1.py	test_RADIO5G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_23458.py	test_RADIO5G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_6.py	test_RADIO5G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_ACT_7.py	test_RADIO5G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11AC_CH165_InValid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11AC_CH165_Valid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11AC_Valid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11A_InValid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11A_Valid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_CH165_InValid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_CH165_Valid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_InValid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_1_STAND_11NA_Valid.py	test_RADIO5G_EDIT_BW_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BANDWIDTH_6789.py	test_RADIO5G_EDIT_BW_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BOTH_1_STAND_11A.py	test_radio5G_EDIT_RES_6	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BOTH_1_STAND_11AC.py	test_radio5G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_BOTH_1_STAND_11NA.py	test_radio5G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_1.py	test_RADIO24G_EDIT_CHANNEL_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_234.py	test_RADIO24G_EDIT_CHANNEL_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_5.py	test_RADIO24G_EDIT_CHANNEL_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_CHANNEL_6.py	test_RADIO24G_EDIT_CHANNEL_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_MISS_ATTB.py	test_RADIO5G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_MISS_ATTB_CHANNEL_BW.py	test_RADIO5G_EDIT_RES_6	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_MISS_REQID.py	test_RADIO5G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_REQID_1.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_REQID_23456.py	test_RADIO24G_EDIT_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_RES_1.py	test_RADIO5G_EDIT_RES_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_RES_2.py	test_RADIO5G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GEdit/test_RADIO5G_EDIT_RES_3.py	test_RADIO5G_EDIT_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_1.py	test_RADIO_5G_ACT_1	SKIP	0.08	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Radio5GView\\test_RADIO5GVIEW_RESULT_1.py', 20, 'Skipped: This element is alway Enable')
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_2.py	test_RADIO_5G_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_3.py	test_RADIO_5G_BANDWIDTH_1	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO5GVIEW_RESULT_4.py	test_RADIO_5G_CHANNEL_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_1.py	test_RADIO_5G_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_2.py	test_RADIO_5G_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_3.py	test_RADIO_5G_ACT_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_4.py	test_RADIO_5G_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_5.py	test_RADIO_5G_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_6.py	test_RADIO_5G_ACT_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_7.py	test_RADIO_5G_ACT_6	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_ACT_8.py	test_RADIO_5G_ACT_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_MISS_ATTB.py	test_RADIO_5G_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_MISS_REQID.py	test_RADIO_5G_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_REQID_1.py	test_RADIO_5G_REQID_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_REQID_2.py	test_RADIO_5G_REQID_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_REQID_3.py	test_RADIO_5G_REQID_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_REQID_4.py	test_RADIO_5G_REQID_4	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_REQID_5.py	test_RADIO_5G_REQID_5	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_REQID_6.py	test_RADIO_5G_REQID_5	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_RES_1.py	test_RADIO_5G_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_RES_2.py	test_RADIO_5G_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Radio5GView/test_RADIO_5G_RES_3.py	test_RADIO_5G_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_1.py	test_REBOOT_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_2.py	test_REBOOT_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_3.py	test_REBOOT_ACT_3	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_4.py	test_REBOOT_ACT_4	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_5.py	test_REBOOT_ACT_4	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_6.py	test_REBOOT_ACT_4	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_7.py	test_REBOOT_ACT_7	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_ACT_8.py	test_REBOOT_ACT_7	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_1011.py	test_REBOOT_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_12.py	test_REBOOT_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_13.py	test_REBOOT_ACT_2	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_14.py	test_REBOOT_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_15.py	test_REBOOT_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_16.py	test_REBOOT_ACT_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_17.py	test_REBOOT_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_3.py	test_REBOOT_ACT_1	SKIP	0.04	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reboot\\test_REBOOT_MACLST_3.py', 15, 'Skipped: This is Manual Testcase')
testcase/Reboot/test_REBOOT_MACLST_4.py	test_REBOOT_ACT_1	SKIP	0.05	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reboot\\test_REBOOT_MACLST_4.py', 15, 'Skipped: This is Manual Testcase')
testcase/Reboot/test_REBOOT_MACLST_5.py	test_REBOOT_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_678.py	test_REBOOT_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MACLST_9.py	test_REBOOT_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MESH_ONLY_1_CAP.py	test_REBOOT_ACT_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MESH_ONLY_2_MRE.py	test_REBOOT_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MESH_ONLY_3_BOTH.py	test_REBOOT_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MESH_ONLY_4_MRE.py	test_REBOOT_ACT_1	SKIP	0.05	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reboot\\test_REBOOT_MESH_ONLY_4_MRE.py', 16, 'Skipped: This is Manual Testcase')
testcase/Reboot/test_REBOOT_MISS_ATTB.py	test_REBOOT_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_MISS_REQID.py	test_REBOOT_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reboot/test_REBOOT_REQID_1.py	test_REBOOT_REQID_1	PASS	730.42
testcase/Reboot/test_REBOOT_REQID_2.py	test_REBOOT_REQID_2	PASS	10.9
testcase/Reboot/test_REBOOT_REQID_3.py	test_REBOOT_REQID_3	PASS	10.76
testcase/Reboot/test_REBOOT_REQID_4.py	test_REBOOT_REQID_4	PASS	10.66
testcase/Reboot/test_REBOOT_REQID_5.py	test_REBOOT_REQID_1	PASS	10.79
testcase/Reboot/test_REBOOT_REQID_6.py	test_REBOOT_REQID_1	PASS	10.68
testcase/Reset/test_RESET_ACT_1.py	test_RESET_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_ACT_2345.py	test_RESET_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_ACT_6.py	test_RESET_ACT_1	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_ACT_7.py	test_RESET_ACT_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_ACT_8.py	test_RESET_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_1011.py	test_RESET_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_12.py	test_RESET_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_13.py	test_RESET_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_14.py	test_RESET_ACT_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_15.py	test_RESET_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_16.py	test_RESET_ACT_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_17.py	test_RESET_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_3.py	test_RESET_ACT_1	SKIP	0.05	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reset\\test_RESET_MACLST_3.py', 15, 'Skipped: This is Manual Testcase')
testcase/Reset/test_RESET_MACLST_4.py	test_RESET_ACT_1	SKIP	0.06	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reset\\test_RESET_MACLST_4.py', 15, 'Skipped: This is Manual Testcase')
testcase/Reset/test_RESET_MACLST_5.py	test_RESET_ACT_1	SKIP	0.06	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reset\\test_RESET_MACLST_5.py', 15, 'Skipped: This is Manual Testcase')
testcase/Reset/test_RESET_MACLST_678.py	test_RESET_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MACLST_9.py	test_RESET_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Reset/test_RESET_MESH_ONLY_1_CAP.py	test_RESET_ACT_1	SKIP	0.05	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reset\\test_RESET_MESH_ONLY_1_CAP.py', 15, 'Skipped: This is Manual Testcase')
testcase/Reset/test_RESET_MESH_ONLY_2_MRE.py	test_RESET_ACT_1	SKIP	0.05	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reset\\test_RESET_MESH_ONLY_2_MRE.py', 15, 'Skipped: This is Manual Testcase')
testcase/Reset/test_RESET_MESH_ONLY_3_BOTH.py	test_RESET_ACT_1	SKIP	0.06	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\Reset\\test_RESET_MESH_ONLY_3_BOTH.py', 16, 'Skipped: This is Manual Testcase')
testcase/Reset/test_RESET_REQID_23456.py	test_RESET_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_1.py	test_SPEED_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_2.py	test_SPEED_ACT_2	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_3.py	test_SPEED_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_4.py	test_SPEED_ACT_2	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_5.py	test_SPEED_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_6.py	test_SPEED_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_7.py	test_SPEED_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_ACT_8.py	test_SPEED_ACT_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_MISS_ATTB.py	test_SPEED_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_MISS_REQID.py	test_SPEED_ACT_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_REQ_1.py	test_SPEED_REQ_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_REQ_2.py	test_SPEED_REQ_2	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_REQ_3456.py	test_SPEED_REQ_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_RES_1.py	test_SPEED_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_RES_2.py	test_SPEED_RES_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_RES_3.py	test_SPEED_RES_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SpeedTest/test_SPEED_RES_MESH_ONLY_1.py	test_SPEED_RES_1	PASS	304.72
testcase/SpeedTest/test_SPEED_RES_MESH_ONLY_2.py	test_SPEED_RES_1	SKIP	304.73	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\SpeedTest\\test_SPEED_RES_MESH_ONLY_2.py', 21, 'Skipped: This is Manual Testcase')
testcase/SpeedTest/test_SPEED_RES_MESH_ONLY_3.py	test_SPEED_RES_1	SKIP	304.74	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\SpeedTest\\test_SPEED_RES_MESH_ONLY_3.py', 21, 'Skipped: This is Manual Testcase')
testcase/Ssid2GEdit/test_SSID2G_EDIT_GUEST_NAME_1.py	test_ssid24GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_GUEST_PASS_1.py	test_ssid24GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_NAME_1.py	test_ssid2GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_NAME_23456.py	test_ssid2GEdit_RES_1	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_1.py	test_ssid2GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_23456.py	test_ssid24GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_346.py	test_ssid24GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_MAIN_PASS_5.py	test_ssid24GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_1_MODE_pass.py	test_ssid24GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_2_MODE_open_Enable_true.py	test_ssid24GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_3_MODE_open_Enable_false.py	test_ssid24GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_4_MODE_pass_Enable_true.py	test_ssid24GEdit_RES_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_5_MODE_pass_Enable_false.py	test_ssid24GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_RESULT_6_MODE_open.py	test_ssid24GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID2G_EDIT_RES_1.py	test_ssid2GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GEdit/test_SSID5G_EDIT_RESULT_7.py	test_ssid24GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_ACT_1.py	test_ssid24GView_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_ACT_2345.py	test_ssid24GView_ACT_2345	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_ACT_678.py	test_ssid24GView_ACT_678	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_MISS_ATTB.py	test_ssid24GView_miss_ATTB	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_MISS_REQID.py	test_ssid24GView_miss_REQID	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_REQID_1.py	test_ssid24GView_reqID_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_REQID_23456.py	test_ssid24GView_reqID_23456	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_RES_1.py	test_ssid24GView_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_RES_2.py	test_ssid24GView_RES_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid2GView/test_SSID2GVIEW_RES_3.py	test_ssid24GView_RES_3	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_GUEST_NAME_1.py	test_ssid5GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_GUEST_PASS_1.py	test_ssid5GEdit_RES_1	ERROR	0.12	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_NAME_1.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_NAME_23456.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_1.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_23456.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_346.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_MAIN_PASS_5.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_1_MODE_pass.py	test_ssid5GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_2_MODE_open_Enable_true.py	test_ssid5GEdit_RES_1	ERROR	0.17	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_3_MODE_open_Enable_false.py	test_ssid5GEdit_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_4_MODE_pass_Enable_true.py	test_ssid5GEdit_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_5_MODE_pass_Enable_false.py	test_ssid5GEdit_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_6_MODE_open.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RESULT_7.py	test_ssid5GEdit_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GEdit/test_SSID5G_EDIT_RES_1.py	test_ssid5GEdit_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_ACT_1.py	test_ssid5GView_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_ACT_2345.py	test_ssid5GView_ACT_2345	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_ACT_678.py	test_ssid5GView_ACT_678	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_MISS_ATTB.py	test_ssid5GView_miss_ATTB	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_MISS_REQID.py	test_ssid5GView_miss_ATTB	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_REQID_1.py	test_ssid5GView_ACT_2345	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_REQID_23456.py	test_ssid5GView_ACT_2345	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_RES_1.py	test_ssid5GView_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_RES_2.py	test_ssid5GView_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Ssid5GView/test_SSID5GVIEW_RES_3.py	test_ssid5GView_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_ACT_1.py	test_SYNC_ONT_ACT_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_ACT_2345.py	test_SYNC_ONT_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_ACT_8.py	test_SYNC_ONT_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_ENABLE_234567.py	test_SYNC_ONT_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_MISS_ATTB.py	test_SYNC_ONT_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_MISS_REQID.py	test_SYNC_ONT_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_REQID_1.py	test_SYNC_ONT_ACT_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_REQID_2345.py	test_SYNC_ONT_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_RESULT_1_FALSE.py	test_SYNC_ONT_ACT_1	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_RESULT_1_TRUE.py	test_SYNC_ONT_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_RES_1.py	test_SYNC_ONT_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_RES_2.py	test_SYNC_ONT_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/SyncONTConfig/test_SYNC_ONT_RES_3.py	test_SYNC_ONT_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_ACT_1.py	test_TOPO_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_ACT_2345.py	test_TOPO_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_ACT_6.py	test_TOPO_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_ACT_7.py	test_TOPO_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_ACT_8.py	test_TOPO_ACT_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_ACT_MISS_ATTB.py	test_TOPO_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_ACT_MISS_REQID.py	test_TOPO_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_REQID_1.py	test_TOPO_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_REQID_2345.py	test_TOPO_ACT_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_RESULT_CAP_ONLY_1.py	test_TOPO_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_RES_1.py	test_TOPO_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_RES_2.py	test_TOPO_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPO_RES_3.py	test_TOPO_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/Topology/test_TOPOlogy_Schema.py	test_Topology_Schema	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_ACT_1.py	test_TRACE_ROUTE_RES_1	ERROR	0.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_ACT_2345.py	test_TRACE_ROUTE_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_ACT_6.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_ACT_7.py	test_TRACE_ROUTE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_ACT_8.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_CODE_23.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_CODE_4.py	test_TRACE_ROUTE_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_CODE_5.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_1.py	test_TRACE_ROUTE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_23.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_4.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_5.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_6.py	test_TRACE_ROUTE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_7.py	test_TRACE_ROUTE_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_8.py	test_TRACE_ROUTE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_HOST_9.py	test_TRACE_ROUTE_RES_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_MESH_ONLY_1.py	test_TRACE_ROUTE_MESH_ONLY_1	FAIL	76.37	Exception: Cannot connect EW_0b4454 via (...) Exception: Cannot connect EW_0b4454 via A4:F4:C2:0B:44:55 Exception: Cannot connect EW_0b4454 via A4:F4:C2:0B:44:55
testcase/TraceRoute/test_TRACE_ROUTE_MISS_ATTB.py	test_TRACE_ROUTE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_MISS_REQID.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_REQID_1.py	test_TRACE_ROUTE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_REQID_23456.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_1.py	test_TRACE_ROUTE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_2.py	test_TRACE_ROUTE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_3.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_RESULT_4.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_RES_1.py	test_TRACE_ROUTE_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_RES_2.py	test_TRACE_ROUTE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/TraceRoute/test_TRACE_ROUTE_RES_3.py	test_TRACE_ROUTE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_10.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_1_1.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_1_2.py	test_WAN_CREATE_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_2.py	test_WAN_CREATE_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_2_.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_4.py	test_WAN_CREATE_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_5.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_6.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_7.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_EXCEPTION_8.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_1_DHCP_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_2_DHCP_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_3_DHCP_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_4_STATIC_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_5_STATIC_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_6_STATIC_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_7_L2TP.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPPoE_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.1	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPPoE_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPPoE_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_7_PPTP.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_8_ALL_WAN.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RESULT_9_ALL_WAN.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_RES_1.py	test_WAN_CREATE_RES_1	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_USERNAME_1.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_USERNAME_1_L2TP.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_USERNAME_1_PPPoE_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_USERNAME_1_PPTP.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_USERNAME_2.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_USERNAME_3456.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_VLANID_1.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_VLANID_23456.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WANIDX_23456.py	test_WAN_CREATE_RES_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_DHCP_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_DHCP_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_DHCP_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_L2TP.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPPoE_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPPoE_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPPoE_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_PPTP.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_STATIC_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_STATIC_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_2_STATIC_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_DHCP_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_DHCP_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_DHCP_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_L2TP.py	test_WAN_CREATE_RES_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPPoE_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPPoE_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPPoE_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.14	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_PPTP.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_STATIC_Dual.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_STATIC_IPv4.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanCreate/test_WAN_CREATE_WAN_3_STATIC_IPv6.py	test_WAN_CREATE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_DHCP_IPv4_1.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_PPPoE_Dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_PPPoE_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.17	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_STATIC_Dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_Dual_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_DHCP_Dual_1.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_PPPoE_Dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_PPPoE_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_STATIC_Dual_1.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_DHCP_ipv4_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.2	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_EXCEPTION_4.py	test_WAN_CREATE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_L2TP_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_L2TP_To_DHCP_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_L2TP_To_PPPoE_dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_L2TP_To_PPPoE_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_L2TP_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_L2TP_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_L2TP_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_MISS_ATB_DHCP_Dual_To_DHCP_IPv4_1.py	test_WAN_EDIT_RES_1	ERROR	0.17	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_MISS_ATB_DHCP_Dual_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPOE_Dual_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPOE_ipv4_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_DHCP_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_PPPoE_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_Dual_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_DHCP_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_PPPoE_dual.py	test_WAN_EDIT_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPPoE_ipv4_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPTP_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPTP_To_DHCP_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPTP_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPTP_To_PPPoE_dual.py	test_WAN_EDIT_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPTP_To_PPPoE_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPTP_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_PPTP_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_DHCP_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_PPPoE_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_PPPoE_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_dual_To_STATIC_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_DHCP_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_PPPoE_dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_PPPoE_ipv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_STATIC_ipv4_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_DHCP_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_DHCP_IPv6.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_PPPoE_Dual.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_PPPoE_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_STATIC_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_STATIC_IPv6.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN0_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.13	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_DHCP_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_DHCP_IPv6.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_PPPoE_Dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_PPPoE_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_STATIC_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_STATIC_IPv6.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN2_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_DHCP_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_DHCP_IPv6.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_DHCP_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_L2TP.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_PPPoE_Dual.py	test_WAN_EDIT_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_PPPoE_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_PPTP.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_STATIC_IPv4.py	test_WAN_EDIT_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_STATIC_IPv6.py	test_WAN_EDIT_RES_1	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/WanEdit/test_WAN_EDIT_WAN3_To_STATIC_dual.py	test_WAN_EDIT_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_1.py	test_LANVIEW_ACT_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_2.py	test_LANVIEW_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_3.py	test_LANVIEW_ACT_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_4.py	test_LANVIEW_ACT_4	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_5.py	test_LANVIEW_ACT_5	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_6.py	test_LANVIEW_ACT_6	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_7.py	test_LANVIEW_ACT_7	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_ACT_8.py	test_LANVIEW_ACT_8	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_MISS_ATTB.py	test_LANVIEW_ACT_2	ERROR	0.15	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_MISS_REQID.py	test_LANVIEW_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_REQID_1.py	test_LANVIEW_REQID_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_REQID_2.py	test_LANVIEW_REQID_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_REQID_3.py	test_LANVIEW_REQID_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_REQID_4.py	test_LANVIEW_REQID_4	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_REQID_5.py	test_LANVIEW_REQID_5	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_REQID_6.py	test_LANVIEW_REQID_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_RESULT_1.py	test_LANVIEW_RESULT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_RES_1.py	test_LANVIEW_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_RES_2.py	test_LANVIEW_RES_2	ERROR	0.17	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/lanView/test_LANVIEW_RES_3.py	test_LANVIEW_RES_3	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_1.py	test_RADIO24GVIEW_ACT_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_2.py	test_RADIO24GVIEW_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_3.py	test_RADIO24GVIEW_ACT_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_4.py	test_RADIO24GVIEW_ACT_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_5.py	test_RADIO24GVIEW_ACT_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_6.py	test_RADIO24GVIEW_ACT_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_7.py	test_RADIO24GVIEW_ACT_7	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_ACT_8.py	test_RADIO24GVIEW_ACT_7	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_MISS_ATTB.py	test_RADIO24GVIEW_ACT_2	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_MISS_REQID.py	test_RADIO24GVIEW_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_REQID_1.py	test_RADIO24GVIEW_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_REQID_2.py	test_RADIO24GVIEW_RES_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_REQID_3.py	test_RADIO24GVIEW_RES_3	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_REQID_4.py	test_RADIO24GVIEW_RES_4	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_REQID_5.py	test_RADIO24GVIEW_RES_5	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_REQID_6.py	test_RADIO24GVIEW_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_RES_1.py	test_RADIO24GVIEW_RES_6	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_RES_2.py	test_RADIO24GVIEW_RES_6	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO24GVIEW_RES_3.py	test_RADIO24GVIEW_RES_6	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO2GVIEW_RESULT_1.py	test_RADIO_2G_ACT_1	SKIP	0.17	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\radio2GView\\test_RADIO2GVIEW_RESULT_1.py', 20, 'Skipped: This element is alway Enable')
testcase/radio2GView/test_RADIO2GVIEW_RESULT_2.py	test_RADIO_2G_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO2GVIEW_RESULT_3.py	test_RADIO_2G_BANDWITH_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/radio2GView/test_RADIO2GVIEW_RESULT_4.py	test_RADIO_2G_CHANNEL_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_1.py	test_UPGRADE_FW_MESH_ONLY_1	SKIP	0.1	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\upgardeFirmware\\test_UPGRADE_FW_MESH_ONLY_1.py', 17, 'Skipped: This is Manual Testcase')
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_2.py	test_UPGRADE_FW_MESH_ONLY_1	SKIP	0.1	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\upgardeFirmware\\test_UPGRADE_FW_MESH_ONLY_2.py', 17, 'Skipped: This is Manual Testcase')
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_3.py	test_UPGRADE_FW_MESH_ONLY_1	SKIP	0.11	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\upgardeFirmware\\test_UPGRADE_FW_MESH_ONLY_3.py', 17, 'Skipped: This is Manual Testcase')
testcase/upgardeFirmware/test_UPGRADE_FW_MESH_ONLY_4.py	test_UPGRADE_FW_MESH_ONLY_1	SKIP	0.12	('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase (...) ('E:\\Auto_WorkingTesting\\Auto_API_MESH\\testcase\\upgardeFirmware\\test_UPGRADE_FW_MESH_ONLY_4.py', 17, 'Skipped: This is Manual Testcase')
testcase/wanRemove/test_WANREMOVE_IDX_5.py	test_WAN_REMOVE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_123.py	test_WAN_REMOVE_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_132.py	test_WAN_REMOVE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_213.py	test_WAN_REMOVE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_231.py	test_WAN_REMOVE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_312.py	test_WAN_REMOVE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_321.py	test_WAN_REMOVE_RES_1	ERROR	0.19	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_7.py	test_WAN_REMOVE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_RES_8_REWAN0.py	test_WAN_REMOVE_RES_1	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_REWAN1_ADD_WAN1.py	test_WAN_REMOVE_RES_1	ERROR	0.08	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_REWAN1_ADD_WAN23.py	test_WAN_REMOVE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_REWAN2_ADD_WAN13.py	test_WAN_REMOVE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_REWAN2_ADD_WAN2.py	test_WAN_REMOVE_RES_1	ERROR	0.07	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_REWAN3_ADD_WAN12.py	test_WAN_REMOVE_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanRemove/test_WANREMOVE_REWAN3_ADD_WAN3.py	test_WAN_REMOVE_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_1.py	test_WANVIEW_ACT_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_2.py	test_WANVIEW_ACT_2	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_3.py	test_WANVIEW_ACT_3	ERROR	0.16	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_4.py	test_WANVIEW_ACT_4	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_5.py	test_WANVIEW_ACT_4	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_6.py	test_WANVIEW_ACT_4	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_7.py	test_WANVIEW_ACT_4	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_ACT_8.py	test_WANVIEW_ACT_8	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_MISS_ATTB.py	test_WANVIEW_ACT_2	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_MISS_REQID.py	test_WANVIEW_ACT_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_REQID_1.py	test_WANVIEW_REQID_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_REQID_2.py	test_WANVIEW_REQID_2	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_REQID_3.py	test_WANVIEW_REQID_3	ERROR	0.17	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_REQID_4.py	test_WANVIEW_REQID_4	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_REQID_5.py	test_WANVIEW_REQID_4	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_REQID_6.py	test_WANVIEW_REQID_4	ERROR	0.06	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_RES_1.py	test_WANVIEW_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_RES_2.py	test_WANVIEW_RES_1	ERROR	0.05	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException
testcase/wanViewConfig/test_WANVIEW_RES_3.py	test_WANVIEW_RES_1	ERROR	0.04	request = (...) request = > @pytest.fixture(autouse=False, scope="class") def login(request): """ Description: Login to MESH AP via API - If mode Mesh is FACTORY --> Login and Create New Mesh Default --> Return Cookie - If Mode Mesh is CAP, and SSIDName is not Default SSID --> First Reset Factory, Then Login and Create new mesh default --> return Cookie - If Mode Mesh is CAP, and SSIDName is Default SSID --> Only Login --> Return Cookie """ # print("START LOGIN") > serialClt = Serial_Lib() testcase\conftest.py:81: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ base\SerialLib.py:20: in __init__ self.con = serial.Serial( C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:33: in __init__ super(Serial, self).__init__(args, *kwargs) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py:244: in __init__ self.open() _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Serial(port='COM24', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=5, xonxoff=False, rtscts=False, dsrdtr=False) def open(self): """\ Open port with current settings. This may throw a SerialException if the port cannot be opened. """ if self._port is None: raise SerialException("Port must be configured before it can be used.") if self.is_open: raise SerialException("Port is already open.") # the "\\.\COMx" format is required for devices other than COM1-COM8 # not all versions of windows seem to support this properly # so that the first few ports are used with the DOS device name port = self.name try: if port.upper().startswith('COM') and int(port[3:]) > 8: port = '\\\\.\\' + port except ValueError: # for like COMnotanumber pass self._port_handle = win32.CreateFile( port, win32.GENERIC_READ \| win32.GENERIC_WRITE, 0, # exclusive access None, # no security win32.OPEN_EXISTING, win32.FILE_ATTRIBUTE_NORMAL \| win32.FILE_FLAG_OVERLAPPED, 0) if self._port_handle == win32.INVALID_HANDLE_VALUE: self._port_handle = None # 'cause __del__ is called anyway > raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) E serial.serialutil.SerialException: could not open port 'COM24': PermissionError(13, 'Access is denied.', None, 5) C:\Users\MIMO\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py:64: SerialException

build #4
2022-11-11 | 1:29 am build #3
2022-10-12 | 6:39 pm build #2
2022-10-12 | 4:48 pm build #1
2022-10-12 | 10:36 am

Build #4

NOVEMBER 11, 2022

895

TEST CASES

175

PASSED

43

FAILED

0

SKIPPED

0

XPASSED

0

XFAILED

677

ERROR

0

RERUN

Build #3

OCTOBER 12, 2022

TEST CASES

11

PASSED

14

FAILED

0

SKIPPED

0

XPASSED

0

XFAILED

0

ERROR

0

RERUN

Build #2

OCTOBER 12, 2022

TEST CASES

5

PASSED

19

FAILED

0

SKIPPED

0

XPASSED

0

XFAILED

1

ERROR

0

RERUN

Build #1

OCTOBER 12, 2022

TEST CASES

14

PASSED

3

FAILED

0

SKIPPED

0

XPASSED

0

XFAILED

8

ERROR

0

RERUN